-
NewLink HD-SMTX042four HDMI inputs to two HDMI outputs matrix /Splitter switch distributes any of the four inputs to any combination of the two HDMI output displays. It supports 4K x 2K resolution (UHD), 1080p (HD), 340MHz/3.4Gbps per channel (10.2Gbps all channel) bandwidth, 3D formats with uncompressed audio and it is HDCP compatible. -
NewLink 4x2 HDMI Matrix with HDCP support. -
NewLink 4x4 HDMI matrix with IR remote control. -
HD-SP204-HD2 is 4-way HDMI splitter with 3d & 4K support and is capable of receiving and transmitting up to 6Gbps/600MHz bandwidth. -
Newlink HD-SPX302 3 inputs to 2 outpus HDMI Matrix Switch Splitter is HDCP Compatible, supports high video resolution 1080p, 225MHz/2.25Gbps per channel (7.5Gbps all channel) bandwidth and compressed audio such as DTS Digital, Dolby Digital, DTS-HD and Dolby True HD. -
NewLink HD-SWTC404 4-port HDMI 4 HDMI inputs to 1 HDMI output high speed switch with built-in HDCP support and 1080p resolution supports 12bit per channel deep colour(36bit in total). It features Audio return Channel (ARC) and supports compressed & compressed audio as well as digital audio Toslink and COAX output simultaneously and Stereo audio output from source device. -
The HDHD-DP-001 is a 20-pin DisplayPort male to DVI-D output female and support conversion from displayport signal to DVI, 8-bit &10-bit deep colour and video Bandwidth up to 10.8Gpbs. -
The HDHD-DP-001CAB is a 20-pin DisplayPort male to DVI-D output female 15cm in length and support conversion from DisplayPort signal to DVI, 8-bit &10-bit deep colour and video Bandwidth up to 10.8Gpbs. -
The HDHD-SVGA allows you to convert a VGA & Audio signal from your computer into an HDMI output with signalling rate up to 1.65Gbps. It supports VGA resolutions up to 1280 x 1024 60/75Hz and up to 1080p.
-
Out of stock
The HDMI-120 with two way IR control extends an HDMI signal over a single CAT5/6 cable (CAT6 up to 120m) . It is capable of transmitting HDMI images of up to 1080p resolution over a distance of up to 120m. It HDCP compatible and supports IR passback. -
Out of stock
The HDMI-ARC adapter allows the use of older devices with your ARC enabled TV and connects to your amplifier via an optical Toslink cable. The pass through mode allows the connection of DVD etc to the TV in the normal way and the ARC function can be switched using the switch on top of the adapter. -
Out of stock
The HDMI-DN301 3 HDMI inputs to 1 HDMI display switch allows you to select inputs by remote control or switches on the unit. The switch supports full 3D up to 1080p resolution, comes complete with UK power supply and the switch's IR Receiver allows the unit to be placed out of sight. -
Out of stock
The HDMI-DN301AE 3 HDMI inputs to 1 HDMI display switch allows the extraction of audio from the active HDMI input and sends it to the optical SPDIF output or the stereo RCA socket on the switch for a connection to a separate amplifier or surround sound decoder. The HDMI-DN301AE supports 4K x 2K as well as 1080p HD including 3D. It also supports the audio return channel to return audio from the display to the switch and on to the amplifier. This facility can be switched from the front panel or the remote control. -
Out of stock
The HDMI-DN401A 4 HDMI inputs to 1 HDMI display switch supports 4k @ 60Hzm HDR, RGB, 4:4:4 and 12 bit colour, full 3D up to 1080p @ 60Hz, HD audio with audio jack for analogue stereo when source is LPCM. -
The HDMI-DN402AE 4 HDMI inputs to 2 HDMI outputs supports 3D and full 1080p HD resolution. It allows you to separate audio from one output source and produces an optical SPDIF output. This output can then be connected to an audio amplifier and use the 3.5mm jack socket for connecting headphones. The HDMI-DN402AE can be operated using the remote control (included) or via the matrix front panel. -
Out of stock
The HDMI-DN501 5 HDMI inputs to 1 HDMI display Pro switch allows you to select inputs by remote control or switches on the unit. The switch supports 4K @60Hz & 4K @ 30Hz, full 3D up to 1080p resolution, comes complete with UK power supply and the switch's IR Receiver allows the unit to be placed out of sight. -
Out of stock
The HDMI-EDID is an EDID emulator that can solve HDMI resolution problems between source and display. It is 4K and 3D Compatible, supports 16 modes of EDID as well as audio from 2 channel to Dolby Digital and DTS. -
The HDMI-EX100 HDBAseT4K RS232 with two way IR control extends an HDMI signal over a single CAT65/6 cable up to 100m. The HMI-EX100 requires only one power supply. Full control of devices at each end is possible using the built in IR and RS232 facilities and this kit can connect your smart TV to the internet using the same network cable. It is capable of transmitting HDMI images of up to 4k UHD resolution over a distance of up to 70m and 1080p images over a distance of up to 100m. -
Out of stock
The HDMI-EX120 is an HDMI over CAT5e/CAT6 TCP - IP up to 120m extender can be used in one-to-one and one-to-many configuration. In one-to-many configuration, the extender will need to be used in conjunction with a simple network switch and up to 255 receivers can be used in this configuration. The HDMI-EX120 supports a resolution up yo 1920 x 1080 @ 60Hz and IR control of the kit is possible from the display end by using the IR receiver and transmitter provided in the package. Manual -
Out of stock
The HDMI-EX120R is an HDMI over CAT5e/CAT6 TCP - IP up to 120m receiver can be used in a one-to-many configuration. In one-to-many configuration, the extender will need to be used in conjunction with a simple network switch and up to 255 receivers can be used in this configuration. The HDMI-EX120R supports a resolution up yo 1920 x 1080 @ 60Hz and IR control of the kit is possible from the display end by using the IR receiver and transmitter provided in the package. Manual -
Out of stock
The HDMI-EX200 allows you to extend an HDMI and two-way IR signals over a single 75ohms coaxial cable up to 300m. The HDMO-EX200 carries a full HD 1080p signal plus PCM 48kHz audio up to 7.1ch up to a distance of 100m. The receiver can be daisy-chained to cover unlimited distances. HDMI-EX200 User Manual V1.0 (1) -
The HDMI-EX358 HDbiT4K extends an HDMI signal over a single CAT65/6 cable up to 120m. The HMI-EX358 can support a resolution up to Ultra HD 4K x 2K @ 30Hz, uses a single CAT5 or CAT6 cable, supports IR signal and standard audio Direct Stream Digital (DSD) and HD (HBR) audio. The HDMI-EX358 is HDMI1.4 and HDCP1.4 compliant. -
HDMI-EX50W HDMI Wireless extender extends an HDMI display up to 50 m from the HDMI source (Distance may vary depending on environment; solid objects such as steel, concrete and brick may view shorter distances). It offers superior video quality 1080p @60Hz It has strong anti-interference ability by running 5GHz operation frequency and supports point to point connection. The IR Passback with 20-60KHz frequency on the HDMI-EX50W allows control of source devices from the remote side. It allows you to connect and transmit wireless video content from your Bluray DVD player, HD Cable box or other HDMI device wirelessly, -
The HDMI-EX70 HDMI HDBaseT over CAT5/6 up to 70 extender with 2 way IR control at each end can transmit 4K over 40m or 1080p over 70m. The extender carries a full HD 1080p HDMI signal plus lossless audio including Dolby trueHD, Dolby Digital Plus and DTS-HD master audio.Only one power supply is required which can be placed at either end - the opposite end receives power via the CAT5/6 cable.
