• Adder AV200 VGA & RS232 digital signage series supports video resolution of 1920x1080 at distances up to 100 metres/325 feet, 1280 x 1024 at distances up to 300 metres/1000 feet. The Cable Equalisation feature enable the video sharpness and brightness to be independently adjusted using the dials on the side of the receiver units. Audio is transmitted as digital signals to ensure high fidelity and low noise levels. Phase locked sampling clocks ensure that there are no unwanted clicks when no sound is being played. Data Sheet Manual
  • Adder ALDV104K 2x4 up to 50m CATx AV HDMI splitter /matrix switch Kit uses an uncompressed video system where every frame is sent without loss with resolutions up to 1920 x 1200@60Hz (WUXGA) including 1080p, 720p and 480p resolutions. With two inputs, the system is suited to extending and splitting dual head systems. The switch has intelligent EDID management allowing the true characteristics of the monitor to be passed back to the computer. The DV104T is delivered in a zero config state so you can plug and play. There is no need for additinal drivers or software. Data Sheet Manual
  • Adder SV2x8 SmartView X-Pro KVM switch allows  two users to control eight PS2 & VGA computers and has a built in KVM over CATx extender transmitters to control switch up to 200m away. It features an advanced OSD where up to 16 different passwords and user profiles can be stored. The SmartView X PRO can be set to automatically scan all ports or all active ports at a user definable rate. The switch also allows automatic mouse conversion where PS/2, IntelliMouse and RS232 type mice are all supported between switch and CPUs. Controlling mouse/trackball is PS/2 type. Please note that each of the RJ45 extender ports mirror a local port and requires an optional receiver unit to be purchased. Manual
  • Adder ALPV150T (transmitter only) offers a resolution up to 1080p HD video resolution including 1080i & 720p at a distance up to 150m away. Simply plug the transmitters VGA port into your computer and plug in the USB port, then plug the receiver unit into your screen. Finally, connect the two units together with a length of CATx cable, and you’re finished. Now start delivering your message to customers, clients, staff or who ever you wish. The ADDERLink LPV fully supports DDC and the remote module (ALPV150R) has a video adjustment skew to control picture sharpness on the display screen. Data Sheet Manual
  • Adder ALPV150T (transmitter only) offers a resolution up to 1080p HD video resolution including 1080i & 720p at a distance up to 150m away. Simply plug the transmitters VGA port into your computer and plug in the USB port, then plug the receiver unit into your screen. Finally, connect the two units together with a length of CATx cable, and you’re finished. Now start delivering your message to customers, clients, staff or who ever you wish. The ADDERLink LPV fully supports DDC and the remote module (ALPV150R) has a video adjustment skew to control picture sharpness on the display screen. Data Sheet Manual
  • Adder ALPV150R (Receiveronly) offers a resolution up to 1080p HD video resolution including 1080i & 720p at a distance up to 150m away. Simply plug the transmitters VGA port into your computer and plug in the USB port, then plug the receiver unit into your screen. Finally, connect the two units together with a length of CATx cable, and you’re finished. Now start delivering your message to customers, clients, staff or who ever you wish. The ADDERLink LPV fully supports DDC and the remote module (ALPV150R) has a video adjustment skew to control picture sharpness on the display screen. Data Sheet Manual
  • Adder ALPV150P extender (pair) offers a resolution up to 1080p HD video resolution including 1080i & 720p at a distance up to 150m away. Simply plug the transmitters VGA port into your computer and plug in the USB port, then plug the receiver unit into your screen. Finally, connect the two units together with a length of CATx cable, and you’re finished. Now start delivering your message to customers, clients, staff or who ever you wish. The ADDERLink LPV fully supports DDC and the remote module (ALPV150R) has a video adjustment skew to control picture sharpness on the display screen. This product is EOL. For Similar product, please see  CX-0M-VP-SET Data Sheet Manual
  • Aten VS0108 8-port VGA splitter with audio allows a single VGA video signal to be distributed to 8 output displays with independent stereo control. The splitter support up to 450MHz video bandwidth, which provides optimum video quality, supported by resolutions up to 1920x1440. It features EDID Expert – selects the optimum EDID settings for smooth power-up and highest quality display. The splitter supports VGA, SVGA, UXGA, WUXGA, and multisync. Data Sheet  
  • Aten VS88 8-way VGA splitter allows a single VGA video signal to be distributed to 8 output displays. The splitter supports up to 250MHz video bandwidth, which provides optimum video quality, supported by resolutions up to 1920x1440. VS82 supports VGA, XVGA, SVGA, and UXGA as well as long distance transmission - up to 30m. Data Sheet Manual  
  • Aten CS9134 4-port PS2 & VGA KVM switch will allow a user with one PS2 keyboard, one PS2 mouse and one VGA monitor to control 4 computers with the same connections. It is cascadable up to 3 levels - provides up to 64 computers and computer selection via front panel pushbuttons, hotkeys or On Screen Display (OSD). CS9134 supports superior video quality: up to 1920 x 1440; DDC2B and it is rack mountable in 19" (1U) system rack. Data Sheet Manual
  • Aten CS9138 8-port PS2 & VGA KVM switch will allow a user with one PS2 keyboard, one PS2 mouse and one VGA monitor to control 8 computers with the same connections. It is cascadable up to 3 levels - provides up to 64 computers and computer selection via front panel pushbuttons, hotkeys or On Screen Display (OSD). CS9134 supports superior video quality: up to 1920 x 1440; DDC2B and it is rack mountable in 19" (1U) system rack. Data Sheet Manual
  • Aten VanCryst VM0808T 8x8 VGA & Audio CAT 5 Matrix switch uses VE500/VE300 extenders to route and distribute audio, video, and RS-232 signals over distances of up to 300 meters with 1280x1024 video resolutions. It connects any of 8 Cat 5 A/V inputs to any of 8 Cat 5 A/V outputs and supports additional local input and local display – provides an extra input / output source. It features independent switching of audio and video sources – any audio source can be connected to any video source for output flexibility and supports stereo and balanced audio. Data Sheet Manual
  • The NewLink HD-EXPLE HDMI Over Powerline extender with IR can transmit the signal wherever there is a mains plug, eliminating the need to wire in a network cable or HDMI cable and It can extend a 1080p @ 60Hz signal up to 300m. It supports IR pass back and very easy to set up.
  • Out of stock
    Austin Hughes CyberView RP717PG 7U 17" rackmount LCD display panel with DVI-D / VGA & AV input and Protective Glass with a maximum resolution of 1280 x 1024. Data Sheet Manual
  • The S Y Electronics SY-UHD-S41A 4 ports HDMI UHD 1.4 switch is HDCP compliant, supports 3D and UHD @30Hz with built-in compensation and sync signal technology. The switch supports VESA and SMPTE Video, 480p/1024x768/720p//1280x800/1080p/3840x2160@30Hz. The SY-UHD-S41A allows you to connect up to 4 HDMI devices to be displayed on one screen one-at-a-time. No Longer Manufactured. Please See Replacement Manual
  • Out of stock
    Aten VE819 HDMI Dongle Wireless extender extends an HDMI sends an uncompressed Full HD 1080p signal from your HDMI devices and up to 4 wireless HDMI transmitters can be paired to the receiver. It has less than 1ms latency allowing the source video to be synchronized with a projector almost without delay. The VE819 extends the signals up to 10m or 7m with superior image quality. Data Sheet Manual
  • Out of stock
    Aten VE819T HDMI Dongle Wireless transmitter extends an HDMI sends an uncompressed Full HD 1080p signal from your HDMI devices and up to 4 wireless HDMI transmitters can be paired to the receiver. It has less than 1ms latency allowing the source video to be synchronized with a projector almost without delay. The VE819 extends the signals up to 10m or 7m with superior image quality. Data Sheet Manual
  • HDMI-EX50W HDMI Wireless extender extends an HDMI display up to 50 m from the HDMI source (Distance may vary depending on environment; solid objects such as steel, concrete and brick may view shorter distances). It offers superior video quality 1080p @60Hz It has strong anti-interference ability by running 5GHz operation frequency and supports point to point connection. The IR Passback with 20-60KHz frequency on the HDMI-EX50W allows control of source devices from the remote side. It allows you to connect and transmit wireless video content from your Bluray DVD player, HD Cable box or other HDMI device wirelessly,
  • Aten VE883 4K up to 300m (using VE883K1) or 10 km (using VE883K2) over duplex fiber optic cables. 
    The VE883 meets HDMI Specifications, including 3D, Deep Color (up to 12 bit), and signaling rates (up to 10.2 Gb) to ensure superior video quality. With ATEN’s exclusive FarSmooth technology, the VE883 prevents lagging and freezing by matching the output rates to the input rates and ensures the video display is stable, smooth and identical to the source, particularly in long-distance extension applications where uninterrupted video streams are required. The VE883 features an HDMI input and output, analog audio input and output, USB2.0, IR, RS-232 control port, and a Gigabit Ethernet port. For point-to-point extension, the VE883 can receive fiber optic cables by inserting SFP+ modules to its optic port.
    To avoid bulky cable setup, the VE883 guarantees a simple and fast solution for optimum transmission of Ethernet, IR, HDMI, RS-232, and USB signals up to 10 km simply via a set of duplex optic fiber. The VE883 is also USB transparent, making it compatible with a wide range of USB peripherals. The VE883K1 & VE883K2 are now End of Life. They are replaced with VE883AK1 (300m) & VE883AK2 (10km)
    Data Sheet Manual 
  • The SY-CENTAUR-AOC-18G-40M is a 40m cable delivers uncompressed 18G transmissions for long distance extension of HDMI signals. These advanced fibre-copper hybrid cables are HDR, ARC, Ethernet, CEC, Dolby Vision, HDCP 2.2 and HLG compatible and come in lengths from 7.5m up to 100m. It features outstanding HDR, 10bit colour depth and 1.07 billion colour, Plug & Play and is labelled ‘source’ and ‘display’ for quick long distance HDMI installations.
  • AdderLink ALIF2020P Dual Head Single Link DVI and USB 2.0 over a single CATx extender uses standard IP technology means you have the choice of a single structured cable (CATx) or fiber connection. The result is that you achieve reliable links without interferance. The AdderLink Infinity dual 2020 also offers the option of up to 10km distances with fiber. ALIF2020P supports two Single Link DVI-D resolutions to a maximum of 1920 x 1200 @ 60Hz. Data Sheet Manual
  • Aten CS1188H 8-port USB HDMI Secure KVM Switch is compliant with PSS PP v3.0 (Protection Profile for Peripheral Sharing Switch, Version 3.0) security requirements. It is always-on Chassis Intrusion Detection – renders the ATEN PSS PP v3.0 Secure KVM Switches inoperable when physical tampering is detected and onfigurable Device Filtering – USB CAC Port can be configured to allow/reject whitelisted / blacklisted devices via Admin logon function or Windows-based application. The switch offers superior video quality – up to 4K (3840 x 2160 @ 30 Hz). Data Sheet Manual
  • The DSK-2H is plug-and-play, ready to install and use in under three simple steps:
    1. Connect Computers to the DSK-2H: Plug the DSK-2H into the USB ports and HDMI output connectors on your target PCs
    2. Connect your HDMI display and KM console: set up your command console and connect to the DSK-2H.
    3. Power up your systems and control them with ease: once connected PCs are activated, the DSK-2H shares their power and will automatically send signals to your command console.
      Data Sheet Manual Quick Start Guide
  • Aten VS381 3-port HDMI switch allows up to three HDMI A/V sources to be connected to one HDMI display where the user can toggle between A/V sources using remote control or front panel pushbuttons. It features superior video quality – HDTV resolutions of 480p, 720p, 1080i, 1080p (1920x1080); PC resolutions of VGA, SVGA, XGA, SXGA, and WUXGA (1920x1200) and supports Dolby True HD and DTS HD Master Audio. Data Sheet
  • Aten VC810 is an HDMI to VGA converter (HDMI source to VGA display) and supports frequently used video resolutions of up to 1920 x 1200. It is a Plug & play with no software or external power needed. The VC810 supports wide screen formats.
  • The Newlink HD-EX300A HDMI over two CAT5e/CAT6  up to 45m extender supports 1080p resolution, HDMI 36-bit deep colour and it is HDCP compliant.
  • Aten VS82 2-port VGA splitter allows a single VGA video signal to be distributed to 2 output displays. The splitter support up to 250MHz video bandwidth, which provides optimum video quality, supported by resolutions up to 1920x1440. VS82 supports VGA, XVGA, SVGA, and UXGA as well as long distance transmission - up to 30m. Data Sheet Manual  

Title

Go to Top