-
The HDMI-EX100 HDBAseT4K RS232 with two way IR control extends an HDMI signal over a single CAT65/6 cable up to 100m. The HMI-EX100 requires only one power supply. Full control of devices at each end is possible using the built in IR and RS232 facilities and this kit can connect your smart TV to the internet using the same network cable. It is capable of transmitting HDMI images of up to 4k UHD resolution over a distance of up to 70m and 1080p images over a distance of up to 100m. -
Adder ALDV104K 2x4 up to 50m CATx AV HDMI splitter /matrix switch Kit uses an uncompressed video system where every frame is sent without loss with resolutions up to 1920 x 1200@60Hz (WUXGA) including 1080p, 720p and 480p resolutions. With two inputs, the system is suited to extending and splitting dual head systems. The switch has intelligent EDID management allowing the true characteristics of the monitor to be passed back to the computer. The DV104T is delivered in a zero config state so you can plug and play. There is no need for additinal drivers or software. Data Sheet Manual -
The NewLink HD-EXPLE HDMI Over Powerline extender with IR can transmit the signal wherever there is a mains plug, eliminating the need to wire in a network cable or HDMI cable and It can extend a 1080p @ 60Hz signal up to 300m. It supports IR pass back and very easy to set up. -
Out of stock
Smart-e 4K-900 100m HDBaseT extender pair for HDMI, Infrared and RS232 providing inline power to 100m. Resolutions 4k,2k, 1080p@60Hz, 3D fully HDCP compliant. The extender uses a single CAt5-8 cable, offers wide badwidth IR transmission, in-line powered receiver and transparent RS232 passthrough. Data Sheet Manual -
The HDMI-EX50 extender allows you to extend a full 1080p with 7.1 digital audio up to 50m over a single CAT5/6 cable. It features 3D and a single way IR control of source. Cable length can be adjusted using the EQ on the receiver and requires only one power supply at the transmitter end (supplied). An EDID switch on the transmitter will copy the EDID information from the receiver's display when set to the left. When set to the right, the EDID data from the loop out display will be sent to the source. -
S Y Electronics SY-HDBT-70-SLIM-R (Receiver Only) HDBaseT HDMI 4K with Bidirectional IR & RS232 can extend a signal up to 70m using a single CATx cable with HDCP support and HDMI 1.4 compatibility (4K data can be extended up to 40m). It is the slimmest HDBaseT unit on the market and. It supports all HDMI resolutions up to 4K x 2K (including 1080p, 1080i, etc..) as well as 3D and CEC. Manual -
S Y Electronics SY-MFT21-SET allows you to select from either HDMI or VGA source and extend it up to 70m over HDBaseT with PoC technology and comes complete with the receiver. You need only a single 48V DC power supply to power both the transmitter and receiver. The extender can be powered from either the transmitter or the receiver and is suitable for classrooms or conference rooms where either an HDMI or a VGA signal needs connecting to a display screen or a projector. -
Out of stock
The HDMI-EX120 is an HDMI over CAT5e/CAT6 TCP - IP up to 120m extender can be used in one-to-one and one-to-many configuration. In one-to-many configuration, the extender will need to be used in conjunction with a simple network switch and up to 255 receivers can be used in this configuration. The HDMI-EX120 supports a resolution up yo 1920 x 1080 @ 60Hz and IR control of the kit is possible from the display end by using the IR receiver and transmitter provided in the package. Manual -
Out of stock
The HDMI-EX120R is an HDMI over CAT5e/CAT6 TCP - IP up to 120m receiver can be used in a one-to-many configuration. In one-to-many configuration, the extender will need to be used in conjunction with a simple network switch and up to 255 receivers can be used in this configuration. The HDMI-EX120R supports a resolution up yo 1920 x 1080 @ 60Hz and IR control of the kit is possible from the display end by using the IR receiver and transmitter provided in the package. Manual -
Out of stock
The HDMI-120 with two way IR control extends an HDMI signal over a single CAT5/6 cable (CAT6 up to 120m) . It is capable of transmitting HDMI images of up to 1080p resolution over a distance of up to 120m. It HDCP compatible and supports IR passback. -
Out of stock
The NewLink HD-EX345-120-RX (Receiver Only) HDMI over a single CAT5/CAT6 receiver is an add-on to the HD-EX345-120 extender to allow point-to-point using one transmitter and one receiver, or one-to-many by using one transmitter to many receivers. One-to-many will require an unmanaged gigabit networking hub and multiple receivers as shown in the diagram. -
S Y Electronics SY-HDBT-70-SLIM-T (Transmitter Only) HDBaseT HDMI 4K with Bidirectional IR & RS232 can extend a signal up to 70m using a single CATx cable with HDCP support and HDMI 1.4 compatibility (4K data can be extended up to 40m). It is the slimmest HDBaseT unit on the market and. It supports all HDMI resolutions up to 4K x 2K (including 1080p, 1080i, etc..) as well as 3D and CEC. Manual -
S Y Electronics SY-HDBT-100-SLIM-R (Receiver Only) HDBaseT HDMI 4K with Bidirectional IR & RS232 can extend a signal up to 150m @ 1080p using a single CATx cable with HDCP support and HDMI 1.4 compatibility (4K data can be extended up to 70m). It is the slimmest HDBaseT unit on the market and. It supports all HDMI resolutions up to 4K x 2K (including 1080p, 1080i, etc..) as well as 3D and CEC. Manual -
The Newlink HD-EX300A HDMI over two CAT5e/CAT6 up to 45m extender supports 1080p resolution, HDMI 36-bit deep colour and it is HDCP compliant. -
The Newlink HD-EX333IR01 HDMI over two CAT5e/CAT6 up to 60m extender supports 165MHz/1.65Gb per channel, 8bit deep colour, HDCP compliant and features auto-adjustment of feedback, equalization and amplify. -
The HD-EX344ADUO extender allows you to extend a full 1080p up to 50m over a single CAT5/6 cable. Cat5e/6 cable can substitute HDMI cable to achieve long distance transmission and follows the standard of IEEE-568B. The HDMI extender supports Power Over Cable with Auto-adjustment of feedback, equalization and amplify, it is HDCP compliant and CEC support. -
Aten VE810 HDMI Extender with IR control over CAT5e up to 60m where either the HDMI device or display can be controlled via IR control. It can extend 1080p by 40m; extend 1080i (HDTV) by 60m with superior video quality – 1920 x 1200 @ 60Hz , up to 1080p and supports Dolby True HD and DTS HD Master Audio. It DDC and HDCP 1.1 compatible. Data Sheet -
Aten VE800A HDMI extender over CAT5e extends 1080p by 40m; extend 1080i (HDTV) by 60m and it is HDMI (3D, Deep Color); HDCP Compatible. It supports Dolby True HD and DTS HD Master Audio. Note: If you need to use EDID Bypass and/or HDCP authentication, connect another CAT5e cable between the two VE800 units. Data Sheet -
Aten VE803 HDMI and USB extender over CAT5e cable extends 1080p by 40m and 1080i by 60m and offers superior video quality – HDTV resolutions of 480p, 720p, 1080i, 1080p (1920 x 1080), VGA, SVGA, XGA, SXGA, UXGA and WUXGA (1920 x 1200). It is equipped with USB connectors which allow you to extend any USB device between the units. The USB feature also provides support for touch panel control, allowing you to control the local HDMI source device from the remote display, or control the remote display through the local unit. Data Sheet Manual -
The HDMI-EX70 HDMI HDBaseT over CAT5/6 up to 70 extender with 2 way IR control at each end can transmit 4K over 40m or 1080p over 70m. The extender carries a full HD 1080p HDMI signal plus lossless audio including Dolby trueHD, Dolby Digital Plus and DTS-HD master audio.Only one power supply is required which can be placed at either end - the opposite end receives power via the CAT5/6 cable. -
Sale!
The NewLink HD-EX354K HDMI HDBaseT up to 70m over CATx extender implements HDBaseT extension technology using only one Cat 5e / 6 / 6a / 7 cable to connect the transmitter and receiver and supports resolutions of up to Ultra HD 4kx2k and 1080p Full HD and up to 340MHz bandwidth for high performance video. It features Anti-jamming that resists signal interference during high-quality video transmission using HDBaseT technology. -
Adder ALDV100R HDMI over CATx up to 50m receiver unit uses an uncompressed communication system whereby the pixels of every frame are sent without loss. Resolutions up to 1920x1200 @60Hz (WUXGA) are supported. You can mix-n-match The whole AdderLink DV family of extenders share a common advantage of cross connection. The HDMI transmitters (ALDV100T) of the family can seamlessly be connected to the DVI-D receivers (ALDV120R) and vice versa. Data Sheet Manual -
Adder ALDV120T DVI over CATx up to 50m transmitter unit uses an uncompressed communication system whereby the pixels of every frame are sent without loss. Resolutions up to 1920x1200 @60Hz (WUXGA) are supported. The AdderLink DV120 extenders are delivered in a zero config state so you can connect their two units and start working with them immediately. There’s no need for drivers or software to be installed. Data Sheet Manual -
Adder ALDV120R DVI over CATx up to 50m receiver unit uses an uncompressed communication system whereby the pixels of every frame are sent without loss. Resolutions up to 1920x1200 @60Hz (WUXGA) are supported. The AdderLink DV120 extenders are delivered in a zero config state so you can connect their two units and start working with them immediately. There’s no need for drivers or software to be installed. Data Sheet Manual
