-
Aten Cs72U audio enabled 2 port USB & VGA KVM switch with full base responce that provides a rich experience for 2.1 channel sorround systems. It is supplied with all the necessary KVM cables to connect two computers. Data Sheet Manual Please call for availability -
CatX AV receivers provide a flexible solution for outputting VGA video + Audio over Cat5/6 UTP cable up to 150m. -
Out of stock
The CatX AVP Matrix 2×8 transmitter routes two VGA video sources over Cat5e/6 cable, in any combination, to a maximum of eight displays. -
CE790 USB & VGA is IP based KVM Extender with automatic cable detection (Auto-MDIX) and RS-232 serial functionality that allows access to a computer system from a remote USB console (USB keyboard, monitor, and USB mouse) anywhere on the intranet. It features dual console operation where you can control your system from both the transmitter and receiver USB consoles and high resolution video - up to 1920 x 1080. It can be used point-to-point, point-to-multipoint, and multipoint-to-multipoint. If a multipoint set up is required, extra CE790R and CE790T will be needed. In multipoint configurations, the IGMP (Internet Group Management Protocol) function of your network switches/hubs should be enabled to avoid deterioration of data throughput. Data Sheet Manual -
CE790T USB & VGA is IP based KVM Extender (Transmitter Only) with automatic cable detection (Auto-MDIX) and RS-232 serial functionality that allows access to a computer system from a remote USB console (USB keyboard, monitor, and USB mouse) anywhere on the intranet. It features dual console operation where you can control your system from both the transmitter and receiver USB consoles and high resolution video - up to 1920 x 1080. It can be used point-to-point, point-to-multipoint, and multipoint-to-multipoint. If a multipoint set up is required, extra CE790R and CE790T will be needed. In multipoint configurations, the IGMP (Internet Group Management Protocol) function of your network switches/hubs should be enabled to avoid deterioration of data throughput. Data Sheet Manual -
CE790R USB & VGA is IP based KVM Extender (Receiver Only) with automatic cable detection (Auto-MDIX) and RS-232 serial functionality that allows access to a computer system from a remote USB console (USB keyboard, monitor, and USB mouse) anywhere on the intranet. It features dual console operation where you can control your system from both the transmitter and receiver USB consoles and high resolution video - up to 1920 x 1080. It can be used point-to-point, point-to-multipoint, and multipoint-to-multipoint. If a multipoint set up is required, extra CE790R and CE790T will be needed. In multipoint configurations, the IGMP (Internet Group Management Protocol) function of your network switches/hubs should be enabled to avoid deterioration of data throughput. Data Sheet Manual ce790_s-2014-10-24.pdf (1021.78 KB) ce790 GUI_-s_2011-01-14.pdf (591.21 KB)
-
Aten CS1184 USB & DVI 4 port Secure KVM switch is NIAP-certified and passed the Evaluation Assurance Level 2 (EAL2+) requirements for Peripheral Sharing Switch (PSS) for Human Interface Devices (HIDs) Protection Profile v2.1, satisfying the latest security requisites set by the U.S. Department of Defense for peripheral switches. Compliance ensures maximum information security while sharing a single set of HIDs (keyboards, mouse, speakers, etc.) between multiple computers. Conformity with Protection Profile v2.1 certifies that other USB peripherals cannot be connected to the console ports of the CS1182, and that only a keyboard and mouse are accommodated, therefore providing high-level security, protection and safekeeping of data. Data Sheet Manual -
The Aten VE200R Audio/Video Receiver connects to a transmitter to extend signals up to 200m from the source using a Cat 5e cable and supports high-quality video – up to 1920x1200@60Hz at 30 m, 1600x1200@60Hz at 150 m, 1280x1024@60Hz at 200m. It is Audio and Serial enabled and video gain and compensation are adjustable via OSD. The VE200R supports DDC for the local monitor. This product is no longer available. Please call us on +44 1372 450 794 for an alternative product. Data Sheet Manual -
The Aten VE200 Audio/Video extender connects extends signals up to 200m from the source using a Cat 5e cable and supports high-quality video – up to 1920x1200@60Hz at 30 m, 1600x1200@60Hz at 150 m, 1280x1024@60Hz at 200m. It is Audio and Serial enabled and video gain and compensation are adjustable via OSD. The VE200R supports DDC for the local monitor. This product is no longer available. Please call us on +44 1372 450 794 for an alternative product. Data Sheet Manual -
Aten VS1504T 4 way VGA and Audio over CAT5 splitter is designed to connect one source to 4 displays over a long distance. It uses Cat 5e (or higher) cable to extend displays up to 150 m, 450 m when combined with aten receiving devices and supports 1920 x 1200 @ 60Hz resolution. It is audio and serial enabled and provides an RS232 channel for selection (only one RS-232 channel can be selected at a time). This product is no longer available. For a CAT5/6 4-Way VGA & Audio splitter, please click here Data Sheet -
Aten VS1508T 8 way VGA and Audio over CAT5 splitter is designed to connect one source to 8 displays over a long distance. It uses Cat 5e (or higher) cable to extend displays up to 150 m, 450 m when combined with aten receiving devices and supports 1920 x 1200 @ 60Hz resolution. It is audio and serial enabled and provides an RS232 channel for selection (only one RS-232 channel can be selected at a time). This product is no longer available. For a CAT5/6 8-Way VGA & Audio splitter, please click here Data Sheet -
Out of stock
S Y Electronics CX-0S-AVP-T2 2-way splitter transmitter broadcasts a sharp high quality videos at distances of up to 300m (600m span), using low cost Cat5e UTP cable.
