-
Aten VE892 HDMI extender up to 20km extends the transmission range of HDMI, IR and RS-232 signals using one fiber optic cable, has built-in 8KV/15KV ESD protection, features RS-232 serial port for connecting peripherals such as touch screens, barcode scanners, etc, uses one fiber optic cable to connect the local and remote units, supports full frequency IR signal from 30KHz to 60KHz and superior video quality – up to 1080p@60Hz. Data Sheet Manual -
Aten VE882 up to 600m HDMI fibre optic extender Extends the transmission range of HDMI, IR and RS-232 signals using one fiber optic cable with superior video quality up to 1080p@60Hz and supports bi-directional IR signal transmission, one way at a time. The VE882 features RS-232 serial port for connecting peripherals such as touch screens, barcode scanners, etc. Data Sheet Manual -
Aten VE814A HDMI HDBaseT extender over a single CAT5 cable with Dual Display 4K up to 100m supports one local and two remote displays and one at a local side. The VE814A supports RS-232 and IR signaling pass-through, allowing you to control the HDMI source device from the remote unit (VE814AR) while granting access to the HDMI display device from the local unit (VE8014AT). In addition, it supports Long Reach Mode that extends HDMI signals up to 150 m, 1080p, via a single Cat 5e/6 cable. Data Sheet Manual -
Aten VE813A HDMI HDBaseT extender can extend an HDMI and USB 2.0 signal up to 100m using a single Ethernet cable. It is equipped with USB connectors that provide touch panel control and file transfer functionality. It features Anti-jamming – high quality video transmissions via HDBaseT technology that resists signal interference, supports Dolby True HD and DTS HD Master Audio and ExtremeUSB® – supports transparent USB 2.0 signals and true plug-and-play (no software or drivers required) Data Sheet Manual
-
Aten VE812 HDMI over single CAT5 extender enables an HDMI display to be located up to 100 meters away from the source device and is HDMI (3D, Deep Color, 4kx2k); HDCP Compatible. It features Anti-jamming that resists signal interference during high-quality video transmission using HDBaseT technology and supports resolutions of up to Ultra HD 4kx2k and 1080p Full HD. Its EDID Expert allows you to selects the optimum EDID settings for smooth power-up and highest quality display. Data Sheet -
Aten VE810 HDMI Extender with IR control over CAT5e up to 60m where either the HDMI device or display can be controlled via IR control. It can extend 1080p by 40m; extend 1080i (HDTV) by 60m with superior video quality – 1920 x 1200 @ 60Hz , up to 1080p and supports Dolby True HD and DTS HD Master Audio. It DDC and HDCP 1.1 compatible. Data Sheet -
Aten VE802 HDMI HDBaseT Lite extender up to 70m 4K over a single CAT5/6 cable features Power over HDBaseT (POH) which can send power over Cat 5e/6/6a cable without an additional power supply. The VE802 is HDMI (3D, Deep Color,4k) and HDCP compatible and HDBaseT Anti-jamming – resists signal interference during high-quality video transmission using HDBaseT technology. It offers Bi-directional RS-232 channel that allows you to connect to serial terminals or serial devices, such as touch screens and barcode scanners and Bi-directional IR channel – IR transmission is processed one direction at a time. Data Sheet Manual -
CE790R USB & VGA is IP based KVM Extender (Receiver Only) with automatic cable detection (Auto-MDIX) and RS-232 serial functionality that allows access to a computer system from a remote USB console (USB keyboard, monitor, and USB mouse) anywhere on the intranet. It features dual console operation where you can control your system from both the transmitter and receiver USB consoles and high resolution video - up to 1920 x 1080. It can be used point-to-point, point-to-multipoint, and multipoint-to-multipoint. If a multipoint set up is required, extra CE790R and CE790T will be needed. In multipoint configurations, the IGMP (Internet Group Management Protocol) function of your network switches/hubs should be enabled to avoid deterioration of data throughput. Data Sheet Manual ce790_s-2014-10-24.pdf (1021.78 KB) ce790 GUI_-s_2011-01-14.pdf (591.21 KB) -
CE790T USB & VGA is IP based KVM Extender (Transmitter Only) with automatic cable detection (Auto-MDIX) and RS-232 serial functionality that allows access to a computer system from a remote USB console (USB keyboard, monitor, and USB mouse) anywhere on the intranet. It features dual console operation where you can control your system from both the transmitter and receiver USB consoles and high resolution video - up to 1920 x 1080. It can be used point-to-point, point-to-multipoint, and multipoint-to-multipoint. If a multipoint set up is required, extra CE790R and CE790T will be needed. In multipoint configurations, the IGMP (Internet Group Management Protocol) function of your network switches/hubs should be enabled to avoid deterioration of data throughput. Data Sheet Manual
-
Aten CE775 USB and DUAL View VGA up to 300m KVM extender has superior video quality – 1920x1200@60Hz(150 m), 1280x1024@60Hz(300m) and On Screen Display to conveniently adjust video quality with the intuitive OSD menu system. The RS-232 Channel allow you to connect to a serial terminal or serial devices such as touchscreens and barcode scanners and its Deskew Function automatically synchronizes the time delay of RGB signals to compensate for distance. Data Sheet Manual -
Aten CE610A USB 2.0 and DVI up to 100m KVM extender supports ExtremeUSB® and HDBaseT technology. The USB functionality provides not only peripheral sharing but also provides support for touch panel control and file transfer. The CE610 is ideal for situations where touch panel is required, such as transportation centers, medical facilities, shopping malls, industrial kiosks and supports resolution up to 1920 x 1200 @ 60 Hz at 100m. It also features Anti-jamming - resists signal interference during high-quality video transmissions using HDBaseT technology. Data Sheet Manual -
Aten CE602 USB and DVI Dual Link up to 60m KVM extender over two CAT5e cables supports DVI-D interface and allows transmission of DVI Dual Link signals, features manual compensation control to adjust signal strength in order to compensate for distance and RS-232 serial ports – connect to a serial terminal, or serial devices such as touchscreens and barcode scanners (Baud Rate 115200 bps). It is audio enabled to support stereo speakers and microphone and can support up to 2560 x 1600 (DVI Dual Link) resolution. Data Sheet Manual
