The Smart-e 444K-985-USB is a flexible and cost effective KVM extender for HDMI, USB 2.0, bi-directional IR, full duplex RS232 together with Power Over Cable (POC). Consisting of a transmitter/receiver pair, both units are compact and come with mounting brackets. By incorporating the full HDBaseT2 technology 4K UHD HDMI signals can be transmitted up to 100m. NEW
-
The Smart-e 444K-RX875 is a flexible and cost effective receiver solution to extending HDMI, bi-directional IR, full duplex RS232 together and POC (remote power over cable). The unit is compact and comes with the IR accessories. By incorporating the full HDBaseT technology 4K UHD HDMI signals can be transmitted up to 100m away Data Sheet -
The Smart-e 444K-TX960 is a 1 in and 4 out HDBaseT splitter with RS232 pass-through capable of transmitting 4K UHD signal over 100m of structured cabling (using the appropriate receiver). The 444K-TX960 is a self contained HDBaseT splitter capable of transmitting HDMI signals up to 4K UHD resolutions over 100m of Cat 6 cable using the 444K-RX875 receiver. Data Sheet -
Smart-e 4K-975-USB 2.0 HDVaseT2 over a single CAT6 KVM extender with Rs232, IR, SPDif and PoC is HDCP 2.2 compatible with full duplex RS232 passthrough. The 4K-975-USB is a HDBaseT KVM extender pair capable of distributing HDMI signals up to 4K UHD resolutions to 100m of Cat 5e-6 cable. Each unit is powered via a 24V PSU which can also power the other remote device through the same cable. Data Sheet -
The AdderLink ALAV100P VGA and audio over CATx extender pair extends high-resolution video and high fidelity audio up to 300m. It supports DDC, high fidelity clickless digital audio (16bit, 44.1 kHz, stereo) and extra fine video quality at resolutions up to 1920x1080 at 200m and 1280 x 1024 at 300m Data Sheet Manual -
The AdderLink ALAV100R Receiver unit is sold individually or as a pair (AdderLink AV100P). It extends high-resolution video and high fidelity audio up to 300m. There is a local port on transmitter to connect local screen and speakers or for cascading other AdderLink AV100T transmitter units. The AdderLink AV100R duplicates input from transmitter allowing for 2 video and 2 audio outputs and can be used as a receiver up to 300m from AdderLink AV100T or AdderLink AV104T transmitters. Data Sheet Manual
-
The AdderLink ALAV100T transmitter unit is sold individually or as a pair (AdderLink AV100P). It extends high-resolution video and high fidelity audio up to 300m. There is a local port on transmitter to connect local screen and speakers or for cascading other AdderLink AV100T transmitter units. The AdderLink AV100R duplicates input from transmitter allowing for 2 video and 2 audio outputs and can be used as a receiver up to 300m from AdderLink AV100T or AdderLink AV104T transmitters. Data Sheet Manual
-
The AdderLink ALAV101R Receiver unit duplicates input from transmitter allowing for 2 video and 2 audio outputs and has an integrated skew adjustment allowing the receiver to be located further from the transmitter and/or cope with higher video resolutions. It can be used as a receiver up to 300m from AdderLink AV100T or AdderLink AV104T transmittersand has la ocal cascade port allowing for other receivers to be cascaded from the original receiver. Data Sheet Manual
-
The AdderLink ALAV102T 2 way transmitter and splitter unit extends high-resolution video and high fidelity audio up to 300m. There is a local port on transmitter to connect local screen and speakers or for cascading other AdderLink AV100T transmitter units. Data Sheet Manual
-
The AdderLink ALAV104T 4 way transmitter and splitter unit extends high-resolution video and high fidelity audio up to 300m. There is a local port on transmitter to connect local screen and speakers or for cascading other AdderLink AV100T transmitter units. Data Sheet Manual -
Adder AV200 VGA & RS232 digital signage series supports video resolution of 1920x1080 at distances up to 100 metres/325 feet, 1280 x 1024 at distances up to 300 metres/1000 feet. The Cable Equalisation feature enable the video sharpness and brightness to be independently adjusted using the dials on the side of the receiver units. Audio is transmitted as digital signals to ensure high fidelity and low noise levels. Phase locked sampling clocks ensure that there are no unwanted clicks when no sound is being played. Data Sheet Manual -
Adder AV200 VGA & RS232 digital signage series supports video resolution of 1920x1080 at distances up to 100 metres/325 feet, 1280 x 1024 at distances up to 300 metres/1000 feet. The Cable Equalisation feature enable the video sharpness and brightness to be independently adjusted using the dials on the side of the receiver units. Audio is transmitted as digital signals to ensure high fidelity and low noise levels. Phase locked sampling clocks ensure that there are no unwanted clicks when no sound is being played. Data Sheet Manual -
Adder AV200 VGA & RS232 digital signage series supports video resolution of 1920x1080 at distances up to 100 metres/325 feet, 1280 x 1024 at distances up to 300 metres/1000 feet. The Cable Equalisation feature enable the video sharpness and brightness to be independently adjusted using the dials on the side of the receiver units. Audio is transmitted as digital signals to ensure high fidelity and low noise levels. Phase locked sampling clocks ensure that there are no unwanted clicks when no sound is being played. Data Sheet Manual -
Adder AV200 VGA & RS232 digital signage series supports video resolution of 1920x1080 at distances up to 100 metres/325 feet, 1280 x 1024 at distances up to 300 metres/1000 feet. The Cable Equalisation feature enable the video sharpness and brightness to be independently adjusted using the dials on the side of the receiver units. Audio is transmitted as digital signals to ensure high fidelity and low noise levels. Phase locked sampling clocks ensure that there are no unwanted clicks when no sound is being played. Data Sheet Manual
-
Adder AV200 VGA & RS232 digital signage series supports video resolution of 1920x1080 at distances up to 100 metres/325 feet, 1280 x 1024 at distances up to 300 metres/1000 feet. The Cable Equalisation feature enable the video sharpness and brightness to be independently adjusted using the dials on the side of the receiver units. Audio is transmitted as digital signals to ensure high fidelity and low noise levels. Phase locked sampling clocks ensure that there are no unwanted clicks when no sound is being played. Data Sheet Manual -
Adder AV200 VGA & RS232 digital signage series supports video resolution of 1920x1080 at distances up to 100 metres/325 feet, 1280 x 1024 at distances up to 300 metres/1000 feet. The Cable Equalisation feature enable the video sharpness and brightness to be independently adjusted using the dials on the side of the receiver units. Audio is transmitted as digital signals to ensure high fidelity and low noise levels. Phase locked sampling clocks ensure that there are no unwanted clicks when no sound is being played. Data Sheet Manual -
Adder ALDV100P HDMI over CATx up to 50m extender (Pair) uses an uncompressed communication system whereby the pixels of every frame are sent without loss. Resolutions up to 1920x1200 @60Hz (WUXGA) are supported. You can mix-n-match The whole AdderLink DV family of extenders share a common advantage of cross connection. The HDMI transmitters (ALDV100T) of the family can seamlessly be connected to the DVI-D receivers (ALDV120R) and vice versa. Data Sheet Manual -
Adder ALDV100R HDMI over CATx up to 50m receiver unit uses an uncompressed communication system whereby the pixels of every frame are sent without loss. Resolutions up to 1920x1200 @60Hz (WUXGA) are supported. You can mix-n-match The whole AdderLink DV family of extenders share a common advantage of cross connection. The HDMI transmitters (ALDV100T) of the family can seamlessly be connected to the DVI-D receivers (ALDV120R) and vice versa. Data Sheet Manual
-
Adder ALDV104K 2x4 up to 50m CATx AV HDMI splitter /matrix switch Kit uses an uncompressed video system where every frame is sent without loss with resolutions up to 1920 x 1200@60Hz (WUXGA) including 1080p, 720p and 480p resolutions. With two inputs, the system is suited to extending and splitting dual head systems. The switch has intelligent EDID management allowing the true characteristics of the monitor to be passed back to the computer. The DV104T is delivered in a zero config state so you can plug and play. There is no need for additinal drivers or software. Data Sheet Manual -
Adder ALDV104T 2x4 up to 50m CATx AV HDMI splitter /matrix switch uses an uncompressed video system where every frame is sent without loss with resolutions up to 1920 x 1200@60Hz (WUXGA) including 1080p, 720p and 480p resolutions. With two inputs, the system is suited to extending and splitting dual head systems. The switch has intelligent EDID management allowing the true characteristics of the monitor to be passed back to the computer. The DV104T is delivered in a zero config state so you can plug and play. There is no need for additinal drivers or software. Data Sheet Manual
-
Adder ALDV120P DVI over CATx up to 50m extender (pair) uses an uncompressed communication system whereby the pixels of every frame are sent without loss. Resolutions up to 1920x1200 @60Hz (WUXGA) are supported. The AdderLink DV120 extenders are delivered in a zero config state so you can connect their two units and start working with them immediately. There’s no need for drivers or software to be installed. Data Sheet Manual -
Adder ALDV120R DVI over CATx up to 50m receiver unit uses an uncompressed communication system whereby the pixels of every frame are sent without loss. Resolutions up to 1920x1200 @60Hz (WUXGA) are supported. The AdderLink DV120 extenders are delivered in a zero config state so you can connect their two units and start working with them immediately. There’s no need for drivers or software to be installed. Data Sheet Manual
-
Adder ALDV120T DVI over CATx up to 50m transmitter unit uses an uncompressed communication system whereby the pixels of every frame are sent without loss. Resolutions up to 1920x1200 @60Hz (WUXGA) are supported. The AdderLink DV120 extenders are delivered in a zero config state so you can connect their two units and start working with them immediately. There’s no need for drivers or software to be installed. Data Sheet Manual -
AderLink Infinity ALIF1002P (Pair) over a single CATx cable with unlimited extension distance. The units are also fitted with SFP cages to accept fiber optic transceivers which enable much greater extension distances and features intelligent EDID management allows the true characteristics of the monitor to be passed back to the computer. This ensures perfect video display without the additional configuration. ALIF1002P offers perfect digital video and a maximum resolution of 1920 x 1200 @ 60Hz. Data Sheet Manual -
AderLink Infinity ALIF1002R (Recediover only) can be used with ALIF100T over a single CATx cable to offer unlimited extension distance. The units are also fitted with SFP cages to accept fiber optic transceivers which enable much greater extension distances and features intelligent EDID management allows the true characteristics of the monitor to be passed back to the computer. This ensures perfect video display without the additional configuration. With the addition of AdderLink Infinity management system (A.I.M.) you can turn multiple point-to-point extenders into a truly scalable digital KVM matrix system that allows any workstation to link with any computer connected to the network. See the Adderlink Infinity Matrix data sheet for details. ALIF1002R offers perfect digital video and a maximum resolution of 1920 x 1200 @ 60Hz. Data Sheet Manual -
AderLink Infinity ALIF1002T (Transmitter only) can be used with ALIF100R over a single CATx cable to offer unlimited extension distance. The units are also fitted with SFP cages to accept fiber optic transceivers which enable much greater extension distances and features intelligent EDID management allows the true characteristics of the monitor to be passed back to the computer. This ensures perfect video display without the additional configuration. With the addition of AdderLink Infinity management system (A.I.M.) you can turn multiple point-to-point extenders into a truly scalable digital KVM matrix system that allows any workstation to link with any computer connected to the network. See the Adderlink Infinity Matrix data sheet for details. ALIF1002T offers perfect digital video and a maximum resolution of 1920 x 1200 @ 60Hz. Data Sheet Manual
-
The ADDERLink INFINITY ALIF2002P Dual features full DVI connectivity for either dual link or dual head applications. DVI delivers native digital video signals from your computer to your digital panel (LCD for example) without the need to convert signal types from the digital domain. By delivering native digital video throughout the ADDERLink INFINITY network, you can be assured of accuracy on each and every pixel. The ALIF2002P ADDERLink INFINITY Dual uses USB 2.0 connectivity to interface with your keyboard and mouse, and any other peripheral you wish to use. USB is the most broadly used computer peripheral interface standard available. Data Sheet Manual -
Adder ALIF2002P-MM Dual Head USB & DVI fibre up to 500m extender uses optimal spatially-lossless compression techniques to minimize network bandwidth usage and maximize the user experience. In typical computer desktop applications, ADDERLink INFINITY FX uses remarkably little bandwidth. It features USB 2.0 True Emulations and enables you to connect most USB devices from mice and keyboards through to graphics tablets, jog shuttles, joysticks, 3D explorers and USB flash drives. Data Sheet Manual -
Adder ALIF2002P-SM Dual Head USB & DVI fibre up to 10km extender uses optimal spatially-lossless compression techniques to minimize network bandwidth usage and maximize the user experience. In typical computer desktop applications, ADDERLink INFINITY FX uses remarkably little bandwidth. It features USB 2.0 True Emulations and enables you to connect most USB devices from mice and keyboards through to graphics tablets, jog shuttles, joysticks, 3D explorers and USB flash drives. Data Sheet Manual
-
The ADDERLink INFINITY ALIF2002T (Transmitter Only) Dual features full DVI connectivity for either dual link or dual head applications. DVI delivers native digital video signals from your computer to your digital panel (LCD for example) without the need to convert signal types from the digital domain. By delivering native digital video throughout the ADDERLink INFINITY network, you can be assured of accuracy on each and every pixel. The ALIF2002T ADDERLink INFINITY Dual uses USB 2.0 connectivity to interface with your keyboard and mouse, and any other peripheral you wish to use. USB is the most broadly used computer peripheral interface standard available. Data Sheet Manual -
AdderLink ALIF2020P Dual Head Single Link DVI and USB 2.0 over a single CATx extender uses standard IP technology means you have the choice of a single structured cable (CATx) or fiber connection. The result is that you achieve reliable links without interferance. The AdderLink Infinity dual 2020 also offers the option of up to 10km distances with fiber. ALIF2020P supports two Single Link DVI-D resolutions to a maximum of 1920 x 1200 @ 60Hz. Data Sheet Manual -
AdderLink ALIF2020P Dual Head Single Link DVI and USB 2.0 over a single CATx extender uses standard IP technology means you have the choice of a single structured cable (CATx) or fiber connection. The result is that you achieve reliable links without interferance. The AdderLink Infinity dual 2020 also offers the option of up to 10km distances with fiber. ALIF2020P supports two Single Link DVI-D resolutions to a maximum of 1920 x 1200 @ 60Hz. Data Sheet Manual
-
AdderLink ALIF2020R (Receiver Only) Dual Head Single Link DVI and USB 2.0 over a single CATx extender uses standard IP technology means you have the choice of a single structured cable (CATx) or fiber connection. The result is that you achieve reliable links without interferance. The AdderLink Infinity dual 2020 also offers the option of up to 10km distances with fiber. ALIF2020P supports two Single Link DVI-D resolutions to a maximum of 1920 x 1200 @ 60Hz. Data Sheet Manual -
ADDERLink Infinity ALIF4021R is a dual-head 4K DisplayPort, Audio and USB 2.0 Fiber IP KVM Receiver that is part of the Adder Infinity 4000 4K Digital Extension / Matrix KVM solution. ALIF4021R receiver requires at least one ALIF4021T transmitter to operate. It feature Dual-head 4K DisplayPort, audio and USB extender over a single fiber connection, Pixel-perfect, color accuracy at 4K@60Hz (DCI or UHD), flexible solution: from point-to-point extender to an infinitely extensible matrix used for IT administration or broadcast and unlimited extension distances over fiber. Other features include:- USB 2.0 with Emulation and class control: for faster keyboard and mouse switching plus support for USB mass storage, tablet, touch and more
- Bi-directional analog audio
- Backwards compatible with existing ADDERLink INFINITY 1000 / 2000 Series.
- 10GbE network support
-
ADDERLink Infinity ALIF4021T is a dual-head 4K DisplayPort, Audio and USB 2.0 Fiber IP KVM Transmitter that is part of the Adder Infinity 4000 4K Digital Extension / Matrix KVM solution. ALIF4021T transmitter requires at least one ALIF4021R receiver to operate. It feature Dual-head 4K DisplayPort, audio and USB extender over a single fiber connection, Pixel-perfect, color accuracy at 4K@60Hz (DCI or UHD), flexible solution: from point-to-point extender to an infinitely extensible matrix used for IT administration or broadcast and unlimited extension distances over fiber. Other features include:- USB 2.0 with Emulation and class control: for faster keyboard and mouse switching plus support for USB mass storage, tablet, touch and more
- Bi-directional analog audio
- Backwards compatible with existing ADDERLink INFINITY 1000 / 2000 Series.
- 10GbE network support
-
Adder ALPV150P extender (pair) offers a resolution up to 1080p HD video resolution including 1080i & 720p at a distance up to 150m away. Simply plug the transmitters VGA port into your computer and plug in the USB port, then plug the receiver unit into your screen. Finally, connect the two units together with a length of CATx cable, and you’re finished. Now start delivering your message to customers, clients, staff or who ever you wish. The ADDERLink LPV fully supports DDC and the remote module (ALPV150R) has a video adjustment skew to control picture sharpness on the display screen. Data Sheet Manual
