• S Y Electronics SY-HDBT-70-SLIM-SET HDBaseT HDMI 4K extender set with Bidirectional IR & RS232 can extend a signal up to 70m using a single CATx cable with HDCP support and HDMI 1.4 compatibility (4K data can be extended up to 40m).  It is the slimmest HDBaseT extender on the market and weighs under 700 g. It supports all HDMI resolutions up to 4K x 2K (including 1080p, 1080i, etc..) as well as 3D and CEC. Manual
  • Aten VE803 HDMI and USB extender over CAT5e cable extends 1080p by 40m and 1080i by 60m and  offers superior video quality – HDTV resolutions of 480p, 720p, 1080i, 1080p (1920 x 1080), VGA, SVGA, XGA, SXGA, UXGA and WUXGA (1920 x 1200). It  is equipped with USB connectors which allow you to extend any USB device between the units. The USB feature also provides support for touch panel control, allowing you to control the local HDMI source device from the remote display, or control the remote display through the local unit. Data Sheet Manual
  • The HDMI-EX50 extender allows you to extend a full 1080p with 7.1 digital audio up to 50m over a single CAT5/6 cable. It features 3D and a single way IR control of source. Cable length can be adjusted using the EQ on the receiver and requires only one power supply at the transmitter end (supplied).  An EDID switch on the transmitter will copy the EDID information from the receiver's display when set to the left. When set to the right, the EDID data from the loop out display will be sent to the source.
  • The HDMI-EX358 HDbiT4K extends an HDMI signal over a single CAT65/6 cable up to 120m. The HMI-EX358 can support a resolution up to Ultra HD 4K x 2K @ 30Hz, uses a single CAT5 or CAT6 cable, supports IR signal and standard audio Direct Stream Digital (DSD) and HD (HBR) audio. The HDMI-EX358 is HDMI1.4 and HDCP1.4 compliant.
  • S Y Electronics SY-HDBT-70-SLIM-R (Receiver Only) HDBaseT HDMI 4K with Bidirectional IR & RS232 can extend a signal up to 70m using a single CATx cable with HDCP support and HDMI 1.4 compatibility (4K data can be extended up to 40m).  It is the slimmest HDBaseT unit on the market and. It supports all HDMI resolutions up to 4K x 2K (including 1080p, 1080i, etc..) as well as 3D and CEC. Manual
  • S Y Electronics SY-HDBT-100-SLIM-SET HDBaseT HDMI 4K extender set with Bidirectional IR & RS232 can extend a signal up to 100m using a single CATx cable with HDCP support and HDMI 1.4 compatibility (4K data can be extended up to 70m).  It is the slimmest HDBaseT extender on the market and weighs under 700 g. It supports all HDMI resolutions up to 4K x 2K (including 1080p, 1080i, etc..) as well as 3D and CEC. Manual
  • Adder ALDV100P HDMI over CATx up to 50m extender (Pair) uses an uncompressed communication system whereby the pixels of every frame are sent without loss. Resolutions up to 1920x1200 @60Hz (WUXGA) are supported. You can mix-n-match The whole AdderLink DV family of extenders share a common advantage of cross connection. The HDMI transmitters (ALDV100T) of the family can seamlessly be connected to the DVI-D receivers (ALDV120R) and vice versa. Data Sheet Manual
  • The Aten VB802 extends the transmission range an extra 60m over two Cat 5e cables and provides the quickest and most efficient way to move multimedia content from Transmitter to Receiver. It is HDMI and HDCP compatible, supports Dolby True HD and DTS HD Master Audio, superior video quality – HDTV resolutions of 480p, 720p, 1080i and 1080p (1920 x 1080) and has 8-level EQ adjustment to improve image quality. Data Sheet
  • The NewLink HD-EX345-120 4K HDMI over CAT5/CAT6 extender is a Plug & Play design and can transmit 4K x 2K (3840 x 2160 @30Hz) up to 120m using CAT6 cable. It supports HDMI 1.4, HDCP 1.4 compliant, 20-60KHz IR devices, and local loop output and IR passback.
  • Adder ALDV120P DVI over CATx up to 50m extender (pair) uses an uncompressed communication system whereby the pixels of every frame are sent without loss. Resolutions up to 1920x1200 @60Hz (WUXGA) are supported. The AdderLink DV120 extenders are delivered in a zero config state so you can connect their two units and start working with them immediately. There’s no need for drivers or software to be installed. Data Sheet Manual
  • This NEW S Y Electronics SY-HDBT-70SP-SET Slim Pro HDBaseT 4K extender is a unique product and loaded with extra features and designed with the professional AV installers in mind. The many extensive features assist in system integration, validation and maintenance. It is still the slimmest HDBaseT extender in the world with tremendous flexibility and extraordinary capabilities. This Extender set supports all input resolutions to 4K60 4:4:4, with bi-directional IR, and two independent pass-through RS232 ports. The main RS232 channel (Tx/Rx) is also used for controlling the many features. The second RS232 channel (T2, R2) can also be used for RTS/CTS handshaking. The transmitter unit (SY-HDBT-70SP) also supports de-embedded audio (L/R and Mini-Toslink optical output), as well as many other useful features such as: HDCP management, EDID settings, video Down-Scale, Test Patterns, Video Keep Alive, Temperature & CEC control and diagnostics. Data Sheet Manual
  • S Y Electronics SY-HDBT-70-T (Transmitter Only)  HDBaseT HDMI 4K with Bidirectional IR & RS232 can extend a signal up to 70m using a single CATx cable with HDCP support and HDMI 1.4 compatibility (4K data can be extended up to 40m).  It is the slimmest HDBaseT extender on the market measuring only 108 x 70 x 11.5 mm. It supports all HDMI resolutions up to 4K x 2K (including 1080p, 1080i, etc..) as well as 3D and CEC. SY’s ingenuous chassis cooling system ensures maximum reliability for demanding environments. Manual

Go to Top