VHX-7000-H Smart-e AVoIP Controller unit for H.265 encoder/decoder system with internal Web GUI

£298.80 inc VAT

The VHX-7000-H controller allows the user to control and mange H.264 & H.265 IP streams within an Ethernet network environment; this is achieved through a convenient internal Web GUI. The unit also provides the necessary network isolation between the Multicast video system and any existing network infrastructure.

User Manual V1.0

Description

The VHX-7000-H controller allows the user to control and mange H.264 & H.265 IP streams within an Ethernet network environment; this is achieved through a convenient internal Web GUI. The unit also provides the necessary network isolation between the Multicast video system and any existing network infrastructure.

When installing a AVoIP solution into an existing Ethernet network or simply implementing a new
one, it is advisable to install the VHX-7000-H controller. Minimal networking knowledge or experience is required when using the VHX-7000-H so it is ideal for the newcomer to this technology. It is very much plug ‘n’ play as the controller does all the difficult work of IP address
assignments and overall configuration of the system. The unit acts to isolate your existing or new network from the video streaming part. This minimises any effect the data streaming could have on bandwidth whilst giving the user a powerful control and management interface via the Web GUI.

VHX-7000-H Features:

Dual 100M LAN port
• RS232 control
• 20k-60kHz IR control
• 4 channel GPIO ports
• HTTPS/SSH secure
• 100M Ethernet
• 5/12V GPIO power
• POE Video LAN
• Web GUI interface
• 2 x LAN port
• Drag ‘n’ drop control
• POE – switch powered
• Network isolation
• Mounting brackets
• Secure DC connection
• Compact metal box
• Web GUI interface
• 2 x LAN port
• Drag ‘n’ drop control
• POE – switch powered
• Network isolation
• Mounting brackets
• Secure DC c

Connector 2 x RJ45
Signal type Full duplex
Protocol 100BASE-T Ethernet
Signal level +/- 5V
Date rate 100ME
Control – RS232
Connector 3pin Phoenix
Signal type Full duplex
Signal level +/- 5V
Baud rate Up to 115200
Data bits 8
Stop bits 1
Parity None
Pinout 1-RX, 2-0V, 3-TX
Control – IR
Connector 3.5mm jack socket
Signal pinout Ring – 0V, Tip – IR signal, Sleeve – 12V
Signal type Half duplex
Signal level 12V
Bandwidth 20k-60kHz
Control – GPIO
Connector 6pin Phoenix
Signal type 4 channel I/O level switching
Signal level 5V or 12V selectable
—————————————————————————————————————–
Cat cable connectivity
Number of cables 2 x Cat 5e/6 screened twisted pair cables
Connectors x female screened RJ45 connectors per unit
Termination standard TIA/EIA T568B
Cable requirements Solid conductor, 24 AWG or better
Cable recommendations 400 MHz bandwidth STP (shielded twisted pair)
Transmission distance 100m 100ME Ethernet
—————————————————————————————————————–
Power & physical
POE 802.3af Class 3, PD mode
Optional DC Voltage External 12V/1A PSU
DC connector 2.1mm jack with screw fitting
AC Voltage (External Supply) 100-230 VAC
AC frequency (External Supply) 50/60 Hz
Power consumption 4.5W encoder and decoder
Operating temperature (-10) to 45 degrees C
Storage temperature (-20) to (-60) degrees C
Relative humidity 20 to 90% RH (no condensing)
Dimensions 204 x 98 x 21mm
Product weight 0.5Kg
MTBF 30,000 hours
—————————————————————————————————————–

You may also like…

Title

Go to Top