SDS-1002 Smart-e 30m HDMI, RGBHV, Audio, Composite Video, RS232 and Ethernet Wall Plate Extender with Inline Power

£719.00 inc VAT

Smart-e SDS-1002 30m wall plate transmitter and receiver pair for HDMI, RGBHV, Audio, RS232, Composite Video and Ethernet providing inline power to 30m. It supports HDMI up to 1.65 Gbps. HDCP/EDID/DDC transparent link, HDMI resolution up to 1080p @60Hz and RGBHV up to UXGA. It is plug & play providing stereo audio and stores RS232 codes for input selection. SDS-1001 is both DVI and DisplayPort compatible.

Data Sheet

Setup Guide


Suitable for a wide variety of applications, especially projector installation.

The SDS-1002 uses standard 3 x CAT 6-8 STP/FTP cable which is flexible, narrow in diameter and low cost. The cables can fit into small trunking and can be terminated easily with standard RJ45 connectors.

The SDS-1002 transmits HDMI signals up to 1080p @60Hz, computer resolutions up to UXGA (1600×1200) and stereo audio. Selection of the signal type can be via the Auto sense feature, RS232 or button control on the wall plate. The receiver unit can be programmed with RS232 command strings to tell the display device which signal type has been chosen

  • Uses easy to install, inexpensive CAT cable
  • Outputs reach up to 30m
  • Support HDMI up to 1.65 Gbps
  • HDCP/EDID/DDC transparent link
  • HDMI resolutions 1080p @60Hz
  • RGBHV resolutions up to UXGA
  • Ethernet interface (extra CAT cable needed)
  • Composite video and audio
  • RS232 extension
  • 12Mbps full speed
  • 3 x CAT 6-8 STP/FTP cables
  • Supplies remote power to wall plate
  • High ground loop immunity
  • Button control & auto sense
  • Compact receiver units
  • Stereo audio
  • Store RS232 codes for input selection
  • Plug and play
  • DVI and Display Port compatible

You may also like…


Go to Top