-
Aten VE810 HDMI Extender with IR control over CAT5e up to 60m where either the HDMI device or display can be controlled via IR control. It can extend 1080p by 40m; extend 1080i (HDTV) by 60m with superior video quality – 1920 x 1200 @ 60Hz , up to 1080p and supports Dolby True HD and DTS HD Master Audio. It DDC and HDCP 1.1 compatible. Data Sheet -
Aten VB552 VGA & Audio over CAT5 repeater extends the transmission range an extra 150m with high-quality video - up to 1920x1200@60Hz at 30m, 1600x1200@60Hz at 150m, 1280x1024@60Hz at 200m. Video gain and compensation are adjustable via OSD and IR remote control for screen on/off and video adjustment at remote site. It is Audio andSerial enabled. Data Sheet Manual -
Aten VS381 3-port HDMI switch allows up to three HDMI A/V sources to be connected to one HDMI display where the user can toggle between A/V sources using remote control or front panel pushbuttons. It features superior video quality – HDTV resolutions of 480p, 720p, 1080i, 1080p (1920x1080); PC resolutions of VGA, SVGA, XGA, SXGA, and WUXGA (1920x1200) and supports Dolby True HD and DTS HD Master Audio. Data Sheet -
Aten VS881 8-port VGA switch allows 8 independent computers or notebook computers to display their video outputs on a single monitor or on the screen via a multimedia projector. It provides a best solution of presentations and speeches to enterprises and education centers. It features fast and convenient computer selection via pushbuttons or infrared (IR) remote control, superior video quality - up to 2048x1536; DDC; DDC2; DDC2B and supports VGA, SVGA, XGA,UXGA, QXGA and multisync monitors. Data Sheet vs881-s_2014-03-19.pdf VS881-IR Command-s_2013-08-30.pdf -
Aten CM1164A 4-port USB DVI-D KVMP Control Center combines a 4-port DVI-D switch with a 2-port USB hub, and provides the following display modes: Quad View mode, which simultaneously displays four digital computers/video sources on a single screen; as well as Picture in Picture mode(Dual, Triple or Quad) and Full Screen mode. It features Video DynaSync™ – exclusive ATEN technology eliminates boot-up display problems and optimizes resolution when switching between ports and DCC (Daisy Chain Control) port enables users to connect up to four CM1164A units, and use one console keyboard/mouse to manage computers or another CM1164A. Other features include:- Multiplatform support – Windows, Linux, Mac and Sun
- Keyboard and Mouse support emulation and bypass
- Superior video quality – up to 1920 x 1200 resolution
-
The NewLink HD-EX345-120A HDMI over CAT5/CAT6 extender is a Plug & Play design and can transmit up to 120m using CAT6 cable. It supports 20-60KHz IR devices, and local loop output and IR passback. -
The NewLink HD-EXPLE HDMI Over Powerline extender with IR can transmit the signal wherever there is a mains plug, eliminating the need to wire in a network cable or HDMI cable and It can extend a 1080p @ 60Hz signal up to 300m. It supports IR pass back and very easy to set up. -
The HDMI-EX100 HDBAseT4K RS232 with two way IR control extends an HDMI signal over a single CAT65/6 cable up to 100m. The HMI-EX100 requires only one power supply. Full control of devices at each end is possible using the built in IR and RS232 facilities and this kit can connect your smart TV to the internet using the same network cable. It is capable of transmitting HDMI images of up to 4k UHD resolution over a distance of up to 70m and 1080p images over a distance of up to 100m. -
The HDMI-EX70 HDMI HDBaseT over CAT5/6 up to 70 extender with 2 way IR control at each end can transmit 4K over 40m or 1080p over 70m. The extender carries a full HD 1080p HDMI signal plus lossless audio including Dolby trueHD, Dolby Digital Plus and DTS-HD master audio.Only one power supply is required which can be placed at either end - the opposite end receives power via the CAT5/6 cable. -
Out of stock
The HDMI-DN301 3 HDMI inputs to 1 HDMI display switch allows you to select inputs by remote control or switches on the unit. The switch supports full 3D up to 1080p resolution, comes complete with UK power supply and the switch's IR Receiver allows the unit to be placed out of sight. -
Out of stock
The HDMI-DN501 5 HDMI inputs to 1 HDMI display Pro switch allows you to select inputs by remote control or switches on the unit. The switch supports 4K @60Hz & 4K @ 30Hz, full 3D up to 1080p resolution, comes complete with UK power supply and the switch's IR Receiver allows the unit to be placed out of sight. -
The HDMI-EX358 HDbiT4K extends an HDMI signal over a single CAT65/6 cable up to 120m. The HMI-EX358 can support a resolution up to Ultra HD 4K x 2K @ 30Hz, uses a single CAT5 or CAT6 cable, supports IR signal and standard audio Direct Stream Digital (DSD) and HD (HBR) audio. The HDMI-EX358 is HDMI1.4 and HDCP1.4 compliant.
