-
Newlink HD-SPX302 3 inputs to 2 outpus HDMI Matrix Switch Splitter is HDCP Compatible, supports high video resolution 1080p, 225MHz/2.25Gbps per channel (7.5Gbps all channel) bandwidth and compressed audio such as DTS Digital, Dolby Digital, DTS-HD and Dolby True HD. -
HD-SP204-HD2 is 4-way HDMI splitter with 3d & 4K support and is capable of receiving and transmitting up to 6Gbps/600MHz bandwidth. -
NewLink 4x4 HDMI matrix with IR remote control. -
NewLink 4x2 HDMI Matrix with HDCP support. -
NewLink HD-SMTX042four HDMI inputs to two HDMI outputs matrix /Splitter switch distributes any of the four inputs to any combination of the two HDMI output displays. It supports 4K x 2K resolution (UHD), 1080p (HD), 340MHz/3.4Gbps per channel (10.2Gbps all channel) bandwidth, 3D formats with uncompressed audio and it is HDCP compatible. -
Newlink HD-SLT404 4-port splitter with attached HDMI cable features high speed HDMI, 3D and 4K by 2K support. It is HDCP 1.3 compatible and up to 340MHz bandwidth. -
Newlink HD-SLT402 2-port splitter with attached HDMI cable features high speed HDMI, 3D and 4K by 2K support. It is HDCP 1.3 compatible and up to 340MHz bandwidth. -
The NewLink HD-EXPLE HDMI Over Powerline extender with IR can transmit the signal wherever there is a mains plug, eliminating the need to wire in a network cable or HDMI cable and It can extend a 1080p @ 60Hz signal up to 300m. It supports IR pass back and very easy to set up. -
Sale!
The NewLink HD-EX354K HDMI HDBaseT up to 70m over CATx extender implements HDBaseT extension technology using only one Cat 5e / 6 / 6a / 7 cable to connect the transmitter and receiver and supports resolutions of up to Ultra HD 4kx2k and 1080p Full HD and up to 340MHz bandwidth for high performance video. It features Anti-jamming that resists signal interference during high-quality video transmission using HDBaseT technology. -
The NewLink HD-EX345-120A HDMI over CAT5/CAT6 extender is a Plug & Play design and can transmit up to 120m using CAT6 cable. It supports 20-60KHz IR devices, and local loop output and IR passback. -
Out of stock
The NewLink HD-EX345-120-RX (Receiver Only) HDMI over a single CAT5/CAT6 receiver is an add-on to the HD-EX345-120 extender to allow point-to-point using one transmitter and one receiver, or one-to-many by using one transmitter to many receivers. One-to-many will require an unmanaged gigabit networking hub and multiple receivers as shown in the diagram. -
The Newlink HD-EX333IR01 HDMI over two CAT5e/CAT6 up to 60m extender supports 165MHz/1.65Gb per channel, 8bit deep colour, HDCP compliant and features auto-adjustment of feedback, equalization and amplify. -
The Newlink HD-EX300A HDMI over two CAT5e/CAT6 up to 45m extender supports 1080p resolution, HDMI 36-bit deep colour and it is HDCP compliant. -
The HD Anywhere EX50 HDMI extender is a useful bit of kit for any custom installer. The EX50 50m HDMI over Cat extender set with built-in HDMI loop out, two-way IR and ARC, delivers Full HD 1080p video and audio simultaneously to a local and a remote display up to 50m away. -
The Austin Hughes CyberView DX117 DVI, VGA, HDMI, with audio 1U Console Drawer features Combo PS/2 & USB connection and supports Full HD 1080p resolution. It is FCC & CE certified and RoHS2 & REACH compliant. Dimensions are: 441.6 x 650 x 44 mm / 17.4 x 25.6 x 1.73 inch. It is supplied with a 6ft DVI-D console cable. Being a modular design, the DX117 can be purchased alone as a stand alone Console Drawer or integrated with 8, 12, 16, and 32-port KVM switches. Data Sheet Manual -
Smart-e DX-OP8-HDMI -8-way HDMI output blade supports DP++ and DVI-D, 3D and 6.75Gbps -165MHz interface bandwidth with optional EDID and load function. It extends signal up to 15m and supports a resolution up to 1920x1200 @60Hz. -
Smart-e DX-IP8-HDMI-8-way HDMI input blade supports DP++ and DVI-D, 3D and 6.75Gbps -165MHz interface bandwidth with optional EDID and load function. It extends signal up to 15m and supports a resolution up to 1920x1200 @60Hz.
-
Smart-e DX-IP8-DVI-8-way DVI-D input blade supports DP++ and DVI-D, 3D and 6.75Gbps -165MHz interface bandwidth with optional EDID and load function. It extends signal up to 15m and supports a resolution up to 1920x1200 @60Hz. -
Austin Hughes CyberView CV-801K is a 4K KVM 1U 8-port rack mountable KVM switch that supports DP, HDMI, DVI-D & USB-C video inputs. The CV-801K is multi-platform for PC, SUN & Mac where the switching is done via front buttons or keyboard hotkeys. The CV-801K KVM switch supports a resolution of up to 3840 x 2160 @30Hz. NEW Data Sheet -
The Aten CS692 is a cost-effective 2-Port USB, HDMI with Audio 2-port KVM switch. The switch is HDCP compatible, has DynaSync technology and superior 1920 x 1200, 1080p resolution. Data Sheet Manual -
The Aten CS22H is a 2-port USB 4K HDMI Cable KVM switch with a remote port selector. One KVM console controls two USB HDMI computers and offers superior video quality – up to 4096 x 2160 @ 60 Hz. The CS22H is hook design for space-saving and organized workstation and bus-powered. For 1080p 2-port USB & HDMI Cable KVM switch, please see the CS692. For 2-port USB 3.0 4K HDMI KVM switch with separate cables, please see CS1822 & CS1842 Data Sheet Manual -
Aten NEW CS1844 Dual Display HDMI KVMP switch is compliant with HDMI 2.0 standard and supports superior video quality up to 4K DCI (4096 x 2160 @ 60Hz), offering the most stunning and vivid visuals. It allows the user to use one USB keyboard, mouse and two HDMI monitors control four HDMI computers and share two USB peripherals, supports Quad Display by connecting two Dual Display KVM switches, Video DynaSync™ – an exclusive ATEN technology that optimizes display resolution, speeds up switching between systems, and ensures that windows opened on an extended desktop will not revert to their default configurations on the main display when switching between ports, The CS1844 supports superior video quality – 4K UHD (3840 x 2160 @ 60Hz) and 4K DCI (4096 x 2160 @ 60Hz). Computer selection is via pushbuttons, hotkeys, mouse, remote port selector, and RS-232 commands with built-in 2-port USB 3.1 Gen 1 hub with SuperSpeed 5 Gbps data transfer rates. Data Sheet Manual
-
Aten NEW CS1842 Dual Display HDMI KVMP switch is compliant with HDMI 2.0 standard and supports superior video quality up to 4K DCI (4096 x 2160 @ 60Hz), offering the most stunning and vivid visuals. It allows the user to use one USB keyboard, mouse and two HDMI monitors control two HDMI computers and share two USB peripherals, supports Quad Display by connecting two Dual Display KVM switches, Video DynaSync™ – an exclusive ATEN technology that optimizes display resolution, speeds up switching between systems, and ensures that windows opened on an extended desktop will not revert to their default configurations on the main display when switching between ports, The CS1842 supports superior video quality – 4K UHD (3840 x 2160 @ 60Hz) and 4K DCI (4096 x 2160 @ 60Hz). Computer selection is via pushbuttons, hotkeys, mouse, remote port selector, and RS-232 commands with built-in 2-port USB 3.1 Gen 1 hub with SuperSpeed 5 Gbps data transfer rates. Data Sheet Manual
-
Aten NEW CS1824 4-port USB 3.0 4K HDMI KVMP switch allows you to use one USB keyboard/mouse and one HDMI monitor control four computers and share two USB peripherals. It offers superior video quality – 4K UHD (3840 x 2160 @ 60Hz) and 4K DCI (4096 x 2160 @ 60Hz), Video DynaSync™ – an exclusive ATEN technology that eliminates boot-up display problems and optimizes the resolution when switching among different sources with built-in 2-Port USB 3.1 Gen 1 hub with SuperSpeed 5 Gbps data transfer rates. as well as Audio Mixer Modes that mixes up to two audio sources as audio output. The CS1824 comes with ATEN default EDID mode for smooth power-up and high-quality display and resolution optimization to eliminate compatibility issue. The switch offers independent switching of KVM, USB peripheral, and stereo audio focus2 and is HDMI 2.0 compliant and HDCP 2.2 compliant and it also supports HD Audio2. Data Sheet Manual -
Aten NEW CS1822 2-port USB 3.0 4K HDMI KVMP switch allows you to use one USB keyboard/mouse and one HDMI monitor control four computers and share two USB peripherals. It offers superior video quality – 4K UHD (3840 x 2160 @ 60Hz) and 4K DCI (4096 x 2160 @ 60Hz), Video DynaSync™ – an exclusive ATEN technology that eliminates boot-up display problems and optimizes the resolution when switching among different sources with built-in 2-Port USB 3.1 Gen 1 hub with SuperSpeed 5 Gbps data transfer rates. as well as Audio Mixer Modes that mixes up to two audio sources as audio output. The CS1822 comes with ATEN default EDID mode for smooth power-up and high-quality display and resolution optimization to eliminate compatibility issue. The switch offers independent switching of KVM, USB peripheral, and stereo audio focus2 and is HDMI 2.0 compliant and HDCP 2.2 compliant and it also supports HD Audio2. Data Sheet Manual
-
Aten CS18216 16-port USB 3.0 4K HDMI KVM switch features:
- Superior video quality – up to 4K DCI (4096 x 2160 @ 60Hz) and built-in 2-port USB 3.1 Gen 1 hub with SuperSpeed 5 Gbps data transfer rates
- Cascadable to two levels – controls up to 256 computers
- Multi-Display feature – stacks up to eight CS18216 units and display video from up to 8 monitors (dual display / triple display / quad display / multi-display)
- Video DynaSync™ – an exclusive ATEN technology that eliminates boot-up display problems and optimizes the resolution when switching among different sources
-
Aten CS18208 8-port USB 3.0 4K HDMI KVM switch features:
- Superior video quality – up to 4K DCI (4096 x 2160 @ 60Hz) and built-in 2-port USB 3.1 Gen 1 hub with SuperSpeed 5 Gbps data transfer rates
- Cascadable to three levels – controls up to 512 computers
- Multi-Display feature – stacks up to eight CS18208 units and display video from up to 8 monitors (dual display / triple display / quad display / multi-display)
- Video DynaSync™ – an exclusive ATEN technology that eliminates boot-up display problems and optimizes the resolution when switching among different sources
-
Aten CS1798 USB HDMI Audio one user to 8 computers KVM switch features OSD and is cascadable up to three levels allowing the user to control up to 512 computers. The OSD feature enables the administrator to back up the switch's configuration and user profile information. It supports wide screen resolution and up to 1080p /1920x1200 @ 60Hz. Data Sheet Manual -
Aten CS1794 4 port USB and HDMI KVMP switch with Video DynaSync technology and high-definition sound. It is supplied with all necessary KVM cables to connect 4 computers. Data Sheet Manual -
-
Aten CS17916 USB HDMI Audio one user to 16 computers KVM switch features OSD and is cascadable up to two levels allowing the user to control up to 256 computers. The OSD feature enables the administrator to back up the switch's configuration and user profile information. It supports wide screen resolution and up to 1080p /1920x1200 @ 60Hz. Data Sheet Manual -
Aten CM1942 2-Port 4K DisplayPort Dual Display Mini-Matrix Boundless KVM Switch, combining a 2-port DisplayPort switch and a 2-port USB 3.1 Gen 1 hub, is designed to provide instant access to two DisplayPort computers via a single USB / HDMI console. The CM1942 features two PC Operation Modes to facilitate KVM switching in a 2x2 PC / monitor matrix. In Single PC Mode, content of the PC with the current KVM focus can be displayed over both monitors; Dual PC Mode, on the other hand, allows content of both PCs to be displayed separately on two monitors regardless of the KVM focus. Advanced video support provides a better-defined HDMI connection with vivid video resolutions up to 4K DCI (4096 x 2160 @ 60 Hz). With the CM1942, users can quickly and effortlessly switch between two computers by using convenient pushbuttons, hotkeys, mouse wheel, mouse cursor, and remote port selector. Featuring Boundless Switching, the CM1942 allows users to simply move the mouse cursor across windows to switch to other video sources. This makes it easier to instantly access and control a target computer. With the built-in 2-port USB 3.1 Gen 1 hub, access to connected peripherals is easy between two computers while peripheral switching is independent of the KVM focus. In addition, the CM1942 allows data transfer rate up to 5 Gbps for maximum multimedia operation efficiency, making desktop multitasking effortless and more productive. Engineered to meet the ever-increasing demands for dual displays, ultra-fast data transmission rates, and lossless 4K video resolution, the CM1942 is specifically designed for applications in which multitasking is vital such as graphic design, financial trading, and video post production. Data Sheet cm1942.Manual - cm1942-user-manual-w -
Aten CM1284 4-port USB HDMI Multi-View KVMP switch allows users to manage the data more efficiently by allowing multiple sources to be selected, switched and displayed at the same time with independent keyboard and mouse control. Advanced video support provides a better-defined HDMI connection with video resolutions up to 4K (4096 x 2160 @ 30 Hz). The CM1284 guarantees users a real-time monitoring functionality by offering dual outputs on console side. One provides the following display modes: Quad View, Picture in Picture (PiP), Picture by Picture (PbP), Picture on Picture (PoP), and the other one provides Full Screen mode. Featuring Boundless Switching, the CM1284 allows users to simply move the mouse cursor across windows to switch to other video sources. Data Sheet Manual
-
Aten CL6708MW 17.3" LED 8-port USB DVI Full HD touchpad LCD KVM switch single rail sliding housing with top and bottom clearance for smooth operation in a 1U rack. It supports superior video quality – up to 1920 x 1080 @ 60Hz; DDC, DDC2, DDC2B and YUV video format for greater compatibility. It offers Audio support and Video DynaSync™ – exclusive ATEN technology eliminates boot-up display problems and optimizes responsiveness when switching between ports. HDCP-compatible for hassle-free content-protected media playback. It features adjustable depth to fi t within the rack and Standard 105-key keyboard; Sun keyboard emulation. Data Sheet Manual -
Aten CL6700MW 17.3" LED USB DVI Full HD touchpad console supports an external console with USB / DVI / VGA / HDMI connectors and superior video quality – up to 1920 x 1080 @ 60Hz; DDC, DDC2, DDC2B. It offers Audio support and DDC emulation – video settings of attached computers are automatically adjusted for optimal output to the monitor. It features adjustable depth to fi t within the rack and Standard 105-key keyboard; Sun keyboard emulation. Data Sheet Manual -
Aten CL3884NW is a 4-port USB HDMI Multi-view Dual Rail Widescreen LCD KVM Switch. Multi-view console controls up to four video sources on one screen with display modes including Quad View, Picture in Picture (PiP), Picture by Picture (PbP), and Picture on Picture (PoP). It features an integrated KVM console with an 18.5” LED-backlit widescreen LCD monitor in a dual rail housing with top and bottom clearance for smooth operation in a 1U high system rack. The Cl3884NW easily resizes and/or repositions any PiP or PbP to suit users’ viewing needs and offers a superior video quality – 1920 x 1080 @ 60Hz. Data Sheet Manual
