-
S Y Electronics SY-HDBT-100-SLIM-R (Receiver Only) HDBaseT HDMI 4K with Bidirectional IR & RS232 can extend a signal up to 150m @ 1080p using a single CATx cable with HDCP support and HDMI 1.4 compatibility (4K data can be extended up to 70m). It is the slimmest HDBaseT unit on the market and. It supports all HDMI resolutions up to 4K x 2K (including 1080p, 1080i, etc..) as well as 3D and CEC. Manual -
The Newlink HD-EX300A HDMI over two CAT5e/CAT6 up to 45m extender supports 1080p resolution, HDMI 36-bit deep colour and it is HDCP compliant. -
The Newlink HD-EX333IR01 HDMI over two CAT5e/CAT6 up to 60m extender supports 165MHz/1.65Gb per channel, 8bit deep colour, HDCP compliant and features auto-adjustment of feedback, equalization and amplify. -
The HD-EX344ADUO extender allows you to extend a full 1080p up to 50m over a single CAT5/6 cable. Cat5e/6 cable can substitute HDMI cable to achieve long distance transmission and follows the standard of IEEE-568B. The HDMI extender supports Power Over Cable with Auto-adjustment of feedback, equalization and amplify, it is HDCP compliant and CEC support. -
Aten VE810 HDMI Extender with IR control over CAT5e up to 60m where either the HDMI device or display can be controlled via IR control. It can extend 1080p by 40m; extend 1080i (HDTV) by 60m with superior video quality – 1920 x 1200 @ 60Hz , up to 1080p and supports Dolby True HD and DTS HD Master Audio. It DDC and HDCP 1.1 compatible. Data Sheet -
Aten VE800A HDMI extender over CAT5e extends 1080p by 40m; extend 1080i (HDTV) by 60m and it is HDMI (3D, Deep Color); HDCP Compatible. It supports Dolby True HD and DTS HD Master Audio. Note: If you need to use EDID Bypass and/or HDCP authentication, connect another CAT5e cable between the two VE800 units. Data Sheet -
Aten VE803 HDMI and USB extender over CAT5e cable extends 1080p by 40m and 1080i by 60m and offers superior video quality – HDTV resolutions of 480p, 720p, 1080i, 1080p (1920 x 1080), VGA, SVGA, XGA, SXGA, UXGA and WUXGA (1920 x 1200). It is equipped with USB connectors which allow you to extend any USB device between the units. The USB feature also provides support for touch panel control, allowing you to control the local HDMI source device from the remote display, or control the remote display through the local unit. Data Sheet Manual -
The HDMI-EX70 HDMI HDBaseT over CAT5/6 up to 70 extender with 2 way IR control at each end can transmit 4K over 40m or 1080p over 70m. The extender carries a full HD 1080p HDMI signal plus lossless audio including Dolby trueHD, Dolby Digital Plus and DTS-HD master audio.Only one power supply is required which can be placed at either end - the opposite end receives power via the CAT5/6 cable. -
Sale!
The NewLink HD-EX354K HDMI HDBaseT up to 70m over CATx extender implements HDBaseT extension technology using only one Cat 5e / 6 / 6a / 7 cable to connect the transmitter and receiver and supports resolutions of up to Ultra HD 4kx2k and 1080p Full HD and up to 340MHz bandwidth for high performance video. It features Anti-jamming that resists signal interference during high-quality video transmission using HDBaseT technology. -
Adder ALDV100R HDMI over CATx up to 50m receiver unit uses an uncompressed communication system whereby the pixels of every frame are sent without loss. Resolutions up to 1920x1200 @60Hz (WUXGA) are supported. You can mix-n-match The whole AdderLink DV family of extenders share a common advantage of cross connection. The HDMI transmitters (ALDV100T) of the family can seamlessly be connected to the DVI-D receivers (ALDV120R) and vice versa. Data Sheet Manual -
Adder ALDV120T DVI over CATx up to 50m transmitter unit uses an uncompressed communication system whereby the pixels of every frame are sent without loss. Resolutions up to 1920x1200 @60Hz (WUXGA) are supported. The AdderLink DV120 extenders are delivered in a zero config state so you can connect their two units and start working with them immediately. There’s no need for drivers or software to be installed. Data Sheet Manual -
Adder ALDV120R DVI over CATx up to 50m receiver unit uses an uncompressed communication system whereby the pixels of every frame are sent without loss. Resolutions up to 1920x1200 @60Hz (WUXGA) are supported. The AdderLink DV120 extenders are delivered in a zero config state so you can connect their two units and start working with them immediately. There’s no need for drivers or software to be installed. Data Sheet Manual
