-
CE790 USB & VGA is IP based KVM Extender with automatic cable detection (Auto-MDIX) and RS-232 serial functionality that allows access to a computer system from a remote USB console (USB keyboard, monitor, and USB mouse) anywhere on the intranet. It features dual console operation where you can control your system from both the transmitter and receiver USB consoles and high resolution video - up to 1920 x 1080. It can be used point-to-point, point-to-multipoint, and multipoint-to-multipoint. If a multipoint set up is required, extra CE790R and CE790T will be needed. In multipoint configurations, the IGMP (Internet Group Management Protocol) function of your network switches/hubs should be enabled to avoid deterioration of data throughput. Data Sheet Manual -
CE790T USB & VGA is IP based KVM Extender (Transmitter Only) with automatic cable detection (Auto-MDIX) and RS-232 serial functionality that allows access to a computer system from a remote USB console (USB keyboard, monitor, and USB mouse) anywhere on the intranet. It features dual console operation where you can control your system from both the transmitter and receiver USB consoles and high resolution video - up to 1920 x 1080. It can be used point-to-point, point-to-multipoint, and multipoint-to-multipoint. If a multipoint set up is required, extra CE790R and CE790T will be needed. In multipoint configurations, the IGMP (Internet Group Management Protocol) function of your network switches/hubs should be enabled to avoid deterioration of data throughput. Data Sheet Manual -
CE790R USB & VGA is IP based KVM Extender (Receiver Only) with automatic cable detection (Auto-MDIX) and RS-232 serial functionality that allows access to a computer system from a remote USB console (USB keyboard, monitor, and USB mouse) anywhere on the intranet. It features dual console operation where you can control your system from both the transmitter and receiver USB consoles and high resolution video - up to 1920 x 1080. It can be used point-to-point, point-to-multipoint, and multipoint-to-multipoint. If a multipoint set up is required, extra CE790R and CE790T will be needed. In multipoint configurations, the IGMP (Internet Group Management Protocol) function of your network switches/hubs should be enabled to avoid deterioration of data throughput. Data Sheet Manual ce790_s-2014-10-24.pdf (1021.78 KB) ce790 GUI_-s_2011-01-14.pdf (591.21 KB)
-
Adder AV4OSDE 4 port PS2 & VGA KVM switch is self-powered as the unit conveniently draws its power from the connected CPUs along the keyboard cable. Power LED confirms sufficient power is available for reliable operation. High video quality - Screen resolution of up to 1900 x 1440 supported. It also features convenient channel selection using On Screen Display selection menu, keyboard hot-key or front panel key, RS232 serial or optional RC1 remote control accessory. Manual -
Adder AV8OSDE 8 port PS2 & VGA KVM switch is self-powered as the unit conveniently draws its power from the connected CPUs along the keyboard cable. Power LED confirms sufficient power is available for reliable operation. High video quality - Screen resolution of up to 1900 x 1440 supported. It also features convenient channel selection using On Screen Display selection menu, keyboard hot-key or front panel key, RS232 serial or optional RC1 remote control accessory. Manual
-
Adder SV2x4 SmartView X-Pro KVM switch allows two users to control four PS2 & VGA computers and has a built in KVM over CATx extender transmitters to control switch up to 200m away. It features an advanced OSD where up to 16 different passwords and user profiles can be stored. The SmartView X PRO can be set to automatically scan all ports or all active ports at a user definable rate. The switch also allows automatic mouse conversion where PS/2, IntelliMouse and RS232 type mice are all supported between switch and CPUs. Controlling mouse/trackball is PS/2 type. Please note that each of the RJ45 extender ports mirror a local port and requires an optional receiver unit to be purchased. Manual -
Adder SV4X16 SmartView X-Pro KVM switch allows four users to control sixteen PS2 & VGA computers and has a built in KVM over CATx extender transmitters to control switch up to 200m away. It features an advanced OSD where up to 16 different passwords and user profiles can be stored. The SmartView X PRO can be set to automatically scan all ports or all active ports at a user definable rate. The switch also allows automatic mouse conversion where PS/2, IntelliMouse and RS232 type mice are all supported between switch and CPUs. Controlling mouse/trackball is PS/2 type. Please note that each of the RJ45 extender ports mirror a local port and requires an optional receiver unit to be purchased. Manual -
The Aten VE200R Audio/Video Receiver connects to a transmitter to extend signals up to 200m from the source using a Cat 5e cable and supports high-quality video – up to 1920x1200@60Hz at 30 m, 1600x1200@60Hz at 150 m, 1280x1024@60Hz at 200m. It is Audio and Serial enabled and video gain and compensation are adjustable via OSD. The VE200R supports DDC for the local monitor. This product is no longer available. Please call us on +44 1372 450 794 for an alternative product. Data Sheet Manual -
The Aten VE200 Audio/Video extender connects extends signals up to 200m from the source using a Cat 5e cable and supports high-quality video – up to 1920x1200@60Hz at 30 m, 1600x1200@60Hz at 150 m, 1280x1024@60Hz at 200m. It is Audio and Serial enabled and video gain and compensation are adjustable via OSD. The VE200R supports DDC for the local monitor. This product is no longer available. Please call us on +44 1372 450 794 for an alternative product. Data Sheet Manual -
Aten KL1508N 8 port CAT5 19" High Density Dual Rail KVM switch in a sliding housing with top and bottom clearance for smooth operation in a 1U high rack features Dual Rail operation - LCD monitor slides independently of the keyboard/touchpad, A dedicated console port for management from an external console - plus an extra PS/2 mouse port for external mouse use with the integrated LCD console and two level password security - only authorized users view and control the computers - up to four users plus an administrator with separate profiles for each. Data Sheet Manual -
The Aten CS1758 8-port Rack mountable KVM switch supports computers with both PS/2 and USB interfaces via cables and audio signal function. It is supplied as a bundle and includes 8 x 1.8 USB & VGA KVM cables. Data Sheet Manual -
Rextron 4 port Hybrid KVM switch with On Screen Display.
