XD150 AdderLink USB 2.0 and DVI CATx Extender

£999.00 inc VAT

AdderLink XD150 USB 2.0 and DVI up to 150m over a single CATx cable features transparent USB 2.0 hi-speed link for keyboards, mice, tablets, touch screens, mass storage and other common USB devices and up to 1920 x 1080 resolution. It offers CD quality analog audio, intelligent EDID management to allow the true characteristics of the monitor to be passed back to the computer, and RS232 can be passed between the units to a maximum baud rate 115K2 via the options port. Adder’s RC4 remote key switch is also supported. The remote unit has an in-built 4-port USB hub to enable several USB devices to be connected.

Data Sheet

Manual

 

Description

ADDERLink XD150 is a high performance KVM (Keyboard, Video, Mouse) extender that enables you to locate your critical computing hardware in a secure and temperature controlled environment away from the user work station whilst maintaining the original user desktop experience.

When operating in High Rate mode, AdderLink XD150 can support one Single Link DVI video display at pixel clocks up to 165MHz (equivalent to a maximum resolution of 1920 x 1200 at 60Hz – aka ‘WUXGA’). If the Long Reach mode is selected, pixel clocks up to 148.5MHz (equivalent to a maximum resolution of 1920 x 1080 at 60Hz – aka ‘1080P’) are supported.

When a remote module is connected and the video display attached to it is detected, the    EDID    (Extended    Display    Identification    Data)    information    is    cloned    and    stored    at    the    local module. Once this is done, a transparent DDC/CI (Display Data Channel/Command Interface) two way communication link is provided between the video display and the video source (your host computer). If the remote monitor is removed then the cloned EDID stored at the local module will still be presented to the video source

  • 150 meter extension distance for a single 1920 x 1080 screen
  • 100 meter extension distance for a single 1920 x 1200 screen
  • Transparent USB 2.0 hi-speed link for keyboards, mice, tablets, touch screens, mass storage and other common USB devices

Hardware compatibility

All computers with DVI, USB and audio.

DVI Interface

The system supports resolutions to a maximum of 1920 x1200@60Hz.

USB 2.0

Supports USB 2.0 devices (low, full and hi-speed). Isochronous devices are supported.

Software compatibility

All known operating systems.

Computer connections LOCAL transmitter

DVI , audio 3.5mm in, USB type B, RS232 10p10c options port, mini USB for firmware upgrade.

Peripheral connections REMOTE receiver

DVI, audio 3.5mm out, USB type A x 4, RS232 10p10c options port.

Physical design

Compact case, robust metal construction. 169mm/6.65” (w), 31mm/1.22” (h), 120mm/4.8” (d), 0.6kg/1.3lbs.

Power

3 Pin Locking DC jack (2 x power adapter included),100-240VAC 50/60Hz, 0.7A, input to power adapter, 12VDC 18W output from power adapter.

Operating temperature

0 to 40ºC / 32 to 104ºF.

Approvals

CE, FCC.

Perfect digital video, real time control

The video extension system is uncompressed, where by every pixel of every frame are sent without loss and in real-time.

Single CATx extension cable

Video, USB 2.0, audio and RS232 signals all pass along a single CATx extension cable.

Up to 150 meter extension distance

Distance is dependent on the monitor resolution, cable type and number of connection breaks for patch panels and wall plates. See the table on the datasheet for details.

Transparent USB 2.0

The transparent USB 2.0 link supports most common USB devices such as mice, keyboards, touch screens, graphic tablets, jog shuttles, joysticks and mass storage devices. Isochronous devices such as web cams and headsets can also be used.

Plug and Play

Installation is straightforward and there is no need for extra drivers or software to be installed.

Locking power connectors

Locking 3 Pin DC jack with 2 power adaptors included.

CD quality analog audio

CD audio quality (stereo channel 16 bit sampled at 44.1kHz) is available to transfer stereo audio from local to remote for Line Out.

Intelligent operation

The extender has an intelligent EDID management to allow the true characteristics of the monitor to be passed back to the computer. A KVM switch mode is also provided for improved compatibility with KVM equipment. The whole system is flash upgradeable from the computer end for future compatibility.

RS232

RS232 can be passed between the units to a maximum baud rate 115K2 via the options port. Adder’s RC4 remote key switch is also supported.

19” rack mounting kit

An easy-access rack mount kit is available for neat mounting of two units in 1U of rack space.

Intelligent USB hub

The remote unit has an in-built 4-port USB hub to enable several USB devices to be connected.

Title

Go to Top