VE829 Aten 5×2 HDMI Wireless Extender

£345.00 inc VAT

Aten VE829 5×2 HDMI wireless extender allows you to switch and independently select any of 5 sources (4 x HDMI connectors, 1 x component connector) between 2 HDTVs with superior video quality – 480P, 720P, 1080i, 1080P.  It features USB HID ports on Transmitter and Receiver units enable wireless keyboard connectivity to control attached computers/laptops and it is HDMI (3D), HDCP compatible.

Data Sheet

Manual:

VE829-IR Command-s_2013-08-30.pdf

ve829-s_2013-10-02.pdf

Description

The VE829 5×2 HDMI Wireless Extender is the first solution to send full uncompressed HD 1080p, while connecting up to 5 source devices and allowing users to switch and independently select any source to display on two HDTVs. Its wireless matrix feature is the biggest breakthrough in Audio / Video solutions to date. This means you can watch cable TV in one location (transmitter side) and, at the same time, independently select a Blu-ray movie to watch in another location (receiver side). The VE829 is capable of streaming Full HD 1080p with support for 3D content and digital audio up to 30m* away, within the home or any desired setup.

The solution consists of a Wireless Transmitter and a Wireless Receiver with connections for the HDMI and Component, along with a loop through (local port) for advanced two-HDTV setups. It also features USB HID connectivity for adding a computer / laptop to the installment, giving you wireless control from the VE829R. Infrared (IR) pass-through enables wireless control of your source devices and helps consolidate your HD A/V electronics, such as a DVDs / Blu-ray players, DVRs / Cable boxes, Game consoles and computers allowing you to design your own custom entertainment.

* Distance, quality and signal may vary depending on the environment; solid structures, such as steel, concrete and brick may result to shorter distance coverage or complete loss of signal.

Note: Connecting additional HDMI switches、splitters、or extenders can decrease the audio signal’s strength and quality

  • Wireless transmission of full uncompressed HD videos up to 30m* for two HDTVs
  • Allows you to switch and independently select any of 5 sources (4 x HDMI connectors, 1 x component connector) between 2 HDTVs
  • Supports full uncompressed HD, 1080P, 3D content and 5.1 channel digital audio
  • Superior video quality – 480P, 720P, 1080i, 1080P
  • USB HID ports on Transmitter and Receiver units enable wireless keyboard connectivity to control attached computers/laptops
  • Based on WHDI™ technology – Low latency < 1 ms
  • HDMI (3D), HDCP compatible
  • No software or driver installation needed
Video Input Interface 4 x HDMI Type A Female (Black)
1 x Component Video Female (Blue/Green/Red)
Impedance 100 Ώ (HDMI)
Max Distance 1.8 m
Video Output Interface VE829T: 1 x HDMI Type A Female (Black)
VE829R: 1 x HDMI Type A Female (Black)
Impedance 100 Ώ
Video Max. Data Rate 6.75 Gbps (2.25 Gbps Per Lane)
Max. Pixel Clock 225 MHz
Compliance HDMI (3D)
HDCP Compatible
Max Resolutions / Distance Up to 1080p@30m
Audio Input 4 x HDMI Type A Female (Black)
1 x Component Audio Female (Red/White)
Output VE829T: 1 x HDMI Type A Female (Black)
VE829R: 1 x HDMI Type A Female (Black)
Control IR 1 x 2.5mm Jack Female (Black)
Power Connector:
VE829T: 1 x DC Jack;
VE829R: 1 x DC Jack (Mini USB)
Consumption:
VE829T: 5 VDC, 9.5W;
VE829R: 5 VDC, 6.7W (Mini USB)
Environment Operating Temp. 0-40°C
Storage Temp. -20 – 60°C
Humidity 0-80% RH, Non-Condensing
Physical
Properties
Housing Plastic
Weight VE829T: 0.30 kg;
VE829R: 0.13 kg
Dimensions
(L x W x H)
VE829T: 23.40 x 9.65 x 3.25 cm;
VE829R: 9.50 x 9.50 x 3.55 cm
Carton Lot 5 pcs

  • 1x VE829T 5×2 HDMI Wireless Transmitter
  • 1x VE829R 5×2 HDMI Wireless Receiver
  • 2x Remote Controls with batteries
  • 1x Component Adapter Cable
  • 1x IR Blaster Cable (Transmitter)
  • 1x IR Sensor Extender Cable (Receiver)
  • 2x Power Adapter
  • 1x HDMI Cable
  • 1x User Instructions

You may also like…

Go to Top