PDUeX-MN-16A-08H PDUeXpert 1U 8 Way Horizontal Remote Monitoring PDU

PDUeX-MN-16A-08H Monitor PDU, Data center, Meter, Outlet, PDU, Plug, Rack, Remote outlet level controls, power on/off, power recycling and restart locked-up, IT equipment, Monitor, load, web, SNMP,Rack PDU 1U 16A 230V, IEC320 C20 Plug (8)C13 Outlet (1)RJ45 (1)Breaker.

£390.00 inc VAT

Compare

PDUeXpert PDUeX-MN-16A-08H allows an administrator to monitor PDU power consumption information from a remote terminal and interface. It combines Power Distribution with the ability to monitor network equipment power draws. Each PDUeX-MN-16A-08H series has an LED digital display indicator to provide an accurate, real-time reading of the aggregate power load in amps on each power circuit in the rack. This function is particulary useful when an IT administrator needs to tackle a remote device power overload and avoid power failure.

PDUeX-MN-16A-08H has current-meter (True RMS) that shows the total power consumption of the PDU and provides real-time remote monitoring of connected servers,  User-Defined Alarm, thresholds for warning of potential circuit overloads before significant IT hitch.

Users can access, configure, and control PDUeX-MN-16A-08H PDUs through secure Web, SNMP Interfaces and comes with PDUeX PDU Management software that allow IT Manager to control multiple PDU. This PDU is equivalent to APC AP7921.

  • Built-in web server to manage PDU by network in real time
  • True RMS Current Meter
  • Local LED Displays Amps, IP Address
  • 10 Base-T Ethernet Port
  • IPv4 Support
  • SNMP Support (v1)
  • SSL Web Browser (Https) for Set Up and Operation
  • Alarm Notification via Email and SNMP
  • User Defined Alarm Thresholds
  • Circuit Breaker Protection
  • Connect up to 1 Temperature and Humidity Probe
  • Optional for Voltage, VA, PF and kWh Monitor

PDUeX-SW-16A-08H Features:

  • Built-in web server to manage PDU by network in real time
  • True RMS Current Meter
  • Local LED Displays Amps, IP Address
  • 10 Base-T Ethernet Port
  • IPv4 Support
  • SNMP Support (v1)
  • SSL Web Browser (Https) for Set Up and Operation
  • Alarm Notification via Email and SNMP
  • User Defined Alarm Thresholds
  • User Defined Power On/OFF Sequence Time.
  • Remote On/Off Power Switching
  • Timed & Scheduled On/Off/Reboot Switching
  • Ping-No-Answer Alarm
  • Memorized last Output Status
  • Circuit Breaker Protection
  • Connect up to 1 Temperature and Humidity Probe
  • Optional for Voltage, VA, PF and kWh Monitor