• The Smart-e 444K-912-WP is a flexible and comprehensive professional HDMI Wall plate extender with CAT 6 distribution system for Commercial, Education and Residential use. It features double gang Wall plate transmitter, HDMI 2.0 4K@60Hz, 4:4:4, 18G, HDR10, Dolby Vision, HDCP/EDID/DDC transparent link, RGBHV resolutions up to UXGA, priority switching HDMI & VGA and output reach up to 70m. Data Sheet
  • The Smart-e 444K-925 is ideal for extending any HDMI signal beyond its standard 5m length to an impressive 150m of Cat cable whilst maintaning all the necessary auxillary communication data like CEC and DDC for correct EDID reading and HDCP. The 444K-925 has extra features to make life easier for the installer: integral looping HDMI inputs at the transmitter and de-embedded audio at the receiver minimise the need for additional products. Data Sheet
  • The Smart-e 444K-985-USB is a flexible and cost effective KVM extender for HDMI, USB 2.0, bi-directional IR, full duplex RS232  together with Power Over Cable (POC). Consisting of a transmitter/receiver pair, both units are compact and come with mounting brackets. By incorporating the full HDBaseT2 technology 4K UHD HDMI signals can be transmitted up to 100m. NEW
  • Out of stock
    Smart-e 4K-700 HDBaseT 70m HDMI Extender pair is designed to extend HDMI, DVI or DisplayPort over a single twisted pair CAT 5e-8 cable. The units use HDbaseT Lite technology to extend 12 bit Deep Colour 3D, 4K and 2K resolutions together with 1080p @60Hz. Data Sheet Manual
  • Smart-e 4K-710 HDBaseT 70m HDMI Extender pair is designed to extend HDMI, DVI or DisplayPort together with bi-directional IR signals and RS232 communication over a single twisted pair CAT 5e-8 cable. The units use HDbaseT Lite technology to extend 12 bit Deep Colour 3D, 4K and 2K resolutions together with 1080p @60Hz. Data Sheet Manual
  • The Smart-e 444K-725 is a HDBaseT transmitter/receiver pair capable of transmitting UHD HDMI signals up to 4K UHD resolutions. The extender pairs provide the pass through of wide band bi-directional InfraRed signals and full duplex RS232 up to 115Kbaud. Whilst POH power (24V) can be sent by either the TX or RX through the Cat 6 cable to provide power to the re-mote end. All that is required is a single Cat6 cable connection to provide all these features. Data Sheet
  • Smart-e 4K-800  HDBaseT 100m HDMI Extender pair for HDMI, DVI, DisplayPort and Infrared. Resolutions 4k,2k, 1080p@60Hz, 3D fully HDCP V2.2. Data Sheet Manual
  • Smart-e 4K-810 100m HDBaseT extender pair for HDMI, Infrared, 100baseT Ethernet and RS232. Resolutions 4k,2k, 1080p@60Hz, 3D fully HDCP compliant. It distributes signals over a single 70m CAT 5-8 cable with wide bandwidth IR transmission and Ethernet and RS232 pass-through. It features dual port Ethernet switch and it is compatible with Smart TV's. Data Sheet Manual
  • Out of stock
    Smart-e 4K-900 100m HDBaseT extender pair for HDMI, Infrared and RS232 providing inline power to 100m. Resolutions 4k,2k, 1080p@60Hz, 3D fully HDCP compliant. The extender uses a single CAt5-8 cable, offers wide badwidth IR transmission, in-line powered receiver and transparent RS232 passthrough. Data Sheet Manual
  • Smart-e 4K-975-USB 2.0 HDVaseT2 over a single CAT6 KVM extender with Rs232, IR, SPDif and PoC is HDCP 2.2 compatible with full duplex RS232 passthrough. The 4K-975-USB is a HDBaseT KVM extender pair capable of distributing HDMI signals up to 4K UHD resolutions to 100m of Cat 5e-6 cable. Each unit is powered via a 24V PSU which can also power the other remote device through the same cable. Data Sheet  
  • Adder ALDV100P HDMI over CATx up to 50m extender (Pair) uses an uncompressed communication system whereby the pixels of every frame are sent without loss. Resolutions up to 1920x1200 @60Hz (WUXGA) are supported. You can mix-n-match The whole AdderLink DV family of extenders share a common advantage of cross connection. The HDMI transmitters (ALDV100T) of the family can seamlessly be connected to the DVI-D receivers (ALDV120R) and vice versa. Data Sheet Manual
  • Adder ALDV100R HDMI over CATx up to 50m receiver unit uses an uncompressed communication system whereby the pixels of every frame are sent without loss. Resolutions up to 1920x1200 @60Hz (WUXGA) are supported. You can mix-n-match The whole AdderLink DV family of extenders share a common advantage of cross connection. The HDMI transmitters (ALDV100T) of the family can seamlessly be connected to the DVI-D receivers (ALDV120R) and vice versa. Data Sheet Manual
  • Adder ALDV104K 2x4 up to 50m CATx AV HDMI splitter /matrix switch Kit uses an uncompressed video system where every frame is sent without loss with resolutions up to 1920 x 1200@60Hz (WUXGA) including 1080p, 720p and 480p resolutions. With two inputs, the system is suited to extending and splitting dual head systems. The switch has intelligent EDID management allowing the true characteristics of the monitor to be passed back to the computer. The DV104T is delivered in a zero config state so you can plug and play. There is no need for additinal drivers or software. Data Sheet Manual
  • Adder ALDV104T 2x4 up to 50m CATx AV HDMI splitter /matrix switch uses an uncompressed video system where every frame is sent without loss with resolutions up to 1920 x 1200@60Hz (WUXGA) including 1080p, 720p and 480p resolutions. With two inputs, the system is suited to extending and splitting dual head systems. The switch has intelligent EDID management allowing the true characteristics of the monitor to be passed back to the computer. The DV104T is delivered in a zero config state so you can plug and play. There is no need for additinal drivers or software. Data Sheet Manual
  • Adder ALDV120P DVI over CATx up to 50m extender (pair) uses an uncompressed communication system whereby the pixels of every frame are sent without loss. Resolutions up to 1920x1200 @60Hz (WUXGA) are supported. The AdderLink DV120 extenders are delivered in a zero config state so you can connect their two units and start working with them immediately. There’s no need for drivers or software to be installed. Data Sheet Manual
  • Adder ALDV120R DVI over CATx up to 50m receiver unit uses an uncompressed communication system whereby the pixels of every frame are sent without loss. Resolutions up to 1920x1200 @60Hz (WUXGA) are supported. The AdderLink DV120 extenders are delivered in a zero config state so you can connect their two units and start working with them immediately. There’s no need for drivers or software to be installed. Data Sheet Manual
  • Adder ALDV120T DVI over CATx up to 50m transmitter unit uses an uncompressed communication system whereby the pixels of every frame are sent without loss. Resolutions up to 1920x1200 @60Hz (WUXGA) are supported. The AdderLink DV120 extenders are delivered in a zero config state so you can connect their two units and start working with them immediately. There’s no need for drivers or software to be installed. Data Sheet Manual
  • Aten CE820 USB 2.0 HDBaseT 4K HDMI  extender extends video, audio, USB, RS232 and Ethernet signals via a single CAT6 cable. It features enhanced bit error detection and correction to resist signal interference during high-quality video transmissions, EDID Buffer for smooth power-up and the highest quality display, status detection and LED indication for HDBaseT™ signal transmission on remote unit, HDBaseT™ Standard mode up to 4K @ 100 m (Cat 6 / 6a),  HDBaseT™ Long-Reach mode up to 1080P @ 150 m and it is HDMI (3D, Deep Color, 1080P, 4K); HDCP 2.2 Compatible. NEW Data Sheet Manual
  • Aten CE920 USB 2.0 DisplayPort HDBaseT 4K  extender:
    • Extends video, audio, USB, RS-232, and Ethernet signals via a single Cat6 / 6a / 2L-2910 Cat 6 cable
    • EDID Buffer for smooth power-up and the highest quality display
    • Long distance with superior video quality - HDBaseT™ Standard mode up to 4K @ 100m (Cat 6 / 6a / 2L-2910) - HDBaseT™ Long-Reach mode up to 1080P @ 150m
    • Supports individual 2-channel stereo audio and USB 2.0 full speed ports
    Data Sheet Manual
  • Aten CE924 USB 2.0 DisplayPort Dual View HDBaseT 4K  extender:
    • Allows dual view DisplayPort access to a computer and KVM control from a remote console
    • Extends video, audio, USB, and RS-232 signals via a single Cat6 / 6a / 2L-2910 Cat 6 cable
    • Supports 4 ports USB 2.0 full speed hub on the receiver–allowing to connect up to 4 various USB 2.0 peripheral
    • Long distance with superior video quality - HDBaseT™ Standard mode up to 4K @ 100 m (Cat 6 / 6a / 2L-2910); (single view only; dual-view resolution up to 1080P) - HDBaseT™ Long-Reach mode up to 1080P @ 150 m (single view only; dual-view resolution up to 720P)
    Data Sheet Manual
  • The Newlink HD-EX300A HDMI over two CAT5e/CAT6  up to 45m extender supports 1080p resolution, HDMI 36-bit deep colour and it is HDCP compliant.
  • The Newlink HD-EX333IR01 HDMI over two CAT5e/CAT6  up to 60m extender supports 165MHz/1.65Gb per channel, 8bit deep colour, HDCP compliant and features auto-adjustment of feedback, equalization and amplify.
  • The HD-EX344ADUO extender allows you to extend a full 1080p up to 50m over a single CAT5/6 cable. Cat5e/6 cable can substitute HDMI cable to achieve long distance transmission and follows the standard of IEEE-568B. The HDMI extender supports Power Over Cable with Auto-adjustment of feedback, equalization and amplify, it is HDCP compliant and CEC support.
  • Out of stock
    The NewLink HD-EX345-120-RX (Receiver Only) HDMI over a single CAT5/CAT6 receiver is an add-on to the HD-EX345-120 extender to allow point-to-point using one transmitter and one receiver, or one-to-many by using one transmitter to many receivers. One-to-many will require an unmanaged gigabit networking hub and multiple receivers as shown in the diagram.

Title

Go to Top